Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction. How to Obtain Warranty Service In the U.S.A. (Stamp comment Approved bellvei 28.05.2008 6:17:59 blank) If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you. In Canada If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you. In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE. © 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. BCH6151CN08EFM2 Printed in China off, but still plugged in to an AC outlet, only the room temperature will be visible. 3. When not in “Auto” mode, only the room temperature will be displayed from 30-99 Fahrenheit or 0-39 Celsius. 4. When the heater is in “Auto” mode and the heating element has been turned off after reaching the set temperature, the fan will continue to run for 25 seconds. Auto Shut Off Programmable Timer Instructions: 1. While your heater is in the ON mode, press the Timer Button ( ) and the numbers will start flashing on the right of the display. pressing the ( ) or ( ) buttons to go from 0-24 to set the number of hours you want your heater to run before shutting off. 2. Two seconds after releasing the Timer Button ( ), the LCD will return to the previous setting and a small clock will appear to indicate the timer is set. 3. If the Timer Button ( ) is pressed while the heater is running, the time remaining is shown and can be changed by pressing the ( ) or ( ) buttons. 4. You can turn off the timer by pressing the Timer Button ( ) back to zero, let the heater run to the end of the programmed period or by turning the heater OFF using the Mode Button ( ). Auto On Programmable Timer Instructions: 1. When your heater is OFF, press the Timer Set button and the numbers will start flashing on the right of the display. Press the ( ) or ( ) buttons to go from 0-24 to set the number of hours that you want your heater to turn On. 2. At the specified time, the heater will turn on to an automatic setting of Auto High at 75 Fahrenheit or 24 Celsius. and will remain on for 2 hours. 3. When the heater turns On, the power light will appear and a small clock will appear on the display to signal the timer is activated. 4. You can turn off the timer by pressing the Timer Button ( ) back to zero, let the heater run to the end of the programmed period or by pressing the Mode Button ( ) before the timer runs out. OSCILLATION INSTRUCTIONS 1. Select the desired temperature and mode settings and press the Oscillation Button ( ) to the ON position. 2. To stop oscillation, press the Oscillation Button ( ) again. 3. Please do not manually turn the heater on the base; it is designed to turn only by motorized oscillation. REMOTE CONTROL INSTRUCTIONS Before operation, insert 2 “AAA” batteries (not included) into the back of the remote control. Fig 2 Temp Up Button Mode/On Button Temp Down ButtonTimer Button Oscillation Button • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. The remote control for this unit has the capability of operating all control panel functions. Please note this remote control will not work through walls. POWER: To turn the unit on press the Mode/On Button. To turn the unit off press the Mode/On Button and scroll to OFF. MODES: To scroll through the various modes LO, HI, AL and AH press the Mode/On Button until you reach your desired setting. OSCILLATION: To start oscillation, press the Oscillation Button ( ) once. To stop oscillation press the Oscillation Button ( ) again. TEMPERATURE: To increase the temperature setting, press the Temp Up Button ( ). To decrease the temperature setting that you desire press the Temp Down Button ( ). Timer: To activate the timer from the remote control, press the button marked Timer. From there you can...
Otros modelos de este manual:Eléctrico - BCH6151CN08EFM2 (597.94 kb)