Votos - , Puntuación media:
(
)
)
Fabricar: Rinnai
Tamaño del archivo: 46.04 kb
Nombre del archivo: 04610730-c068-4dfd-b0c2-5b3c66e3828f.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
13 in (330 mm) W.C. Low - 8,200 High - 21,500 Low - 6,560 High - 17,200 80.6% 3.5 in (89 mm) W.C. 10.5 in (267 mm) W.C AC 120 V, 60 Hz, 47 watts 1/2 inch FNPT Stainless steel inshot burners Direct spark Low: 110.5 Low (LO): minimum combustion 60° - 80° F in 2° increments High (HI): maximum combustion • Electronic 7 day, 28 event programmable set back thermostat • Frost protection function allows a pre-set minimum room temperature • Temperature limiting program to comply with Inside Design Temperature limits Enameled tray with capacity of 3 pints (1.3 liters) Approximately 51 lbs (23 kg) High: 162.7 Side: 2 inches (50 mm) Front: 40 inches (1 m) 32 - 41 dB(A) Bottom front louvers Top: 10 inches (250 mm) provides precise gas flow detects temperature change in 1/2 of a degree monitors and controls combustion fan reduces noise through use of swept blades in convection fan; and through the design of the combustion chamber and heat exchanger which silently expand or contract due to temperature changes continually monitors functions; provides auto shutdown codes; indicates when air filter needs cleaning RHFE-558RWTA SP 7/2009 Rinnai EX22 (RHFE-558RWTA) Safety Devices • Flame rod detects flame failure; results in auto shutdown to prevent escape of gas • Bi-metal switch, thermal fuse, and thermistor detect overheat condition; results in auto shutdown • 3 amp fuse protects against power surge; results in auto shutdown • Abnormal spark at time of ignition results in auto shutdown • Combustion fan purges any gas from the combustion chamber before ignition • Convection fan continues to run after burner shutdown to cool internal parts • Function lock prevents inadvertent operation • Appliance shuts down if room reaches 104° F (40° C) Venting concentric; 3 1/8 inch (80 mm) wall hole Maximum Vent Length 13 feet (4 m) with a maximum of 2 bends; maximum 8 feet (2.4 m) vertically Wall Thickness and Name Kit No. fits walls Flue Manifold Kits (the “A” vent kit is included S Vent Kit FOT-150 3 - 4 1/2 in (75 - 115 mm) with the appliance) A Vent Kit FOT-151 4 1/2 - 9 1/2 in (115 - 240 mm) B Vent Kit FOT-152 9 1/2 - 15 3/4 in (240 - 400mm) C Vent Kit FOT-153 15 3/4 - 23 5/8 in (400 - 600 mm) D Vent Kit FOT-154 23 5/8 - 31 1/2 in (600 - 800 mm) Warranty Labor: 2 years; Parts: 5 years; Heat Exchanger: 10 years with years 6-10 prorated Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to installation. Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-829-1666 • www.rinnai.us...