Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
(50.8mm) PVC Tee AIR FLOW Relief Tube Black Rubber 3/16. (4.8mm) ID Drain Tube Black Rubber 1/2. (12.7mm) ID & Clamps Representative drawing only, some models may vary in appearance. Drain Line Vent Tee 3/4. (18.1mm) PVC or 1/2. (12.7mm) CPVC (Field supplied) A07707 Fig. 7 -- Upflow Installations Vent Through Left Side 359AAV 8 EXHAUST AIR FLOW INLET IN ON OFF VENT Casing Grommet Black Rubber 5/8. (15.9mm) CPVC (Loose parts bag) Drain Connector Black PVC 3/4. (19.1mm) PVC X 1/2. (12.7mm) CPVC (Loose parts bag) 25--24--68 Single Pressure Switch Details Dual Pressure Switch Tee Trap White PVC (loose parts bag) 2. (50.8mm) PVC Coupling Barbed Coupling, 1/2. (12.7mm) OD (loose parts bag) Rotate downward 5° to 10° NOTE: Built--in channel will be angled 5° to 10° also. SIDE VIEW Plastic Cap Yellow or black Vent Drain & Clamps On Some Models ONLY Either: The PVC Drain Tee or a field supplied Relief Tube 2. (50.8mm) PVC Tee Black Rubber 3/16. .4.8mm) ID Elbow Tubes (2) Black Rubber 1/2. (12.7mm) ID & Clamps (loose parts bag) Drain Tube Corrugated 5/8. (15.9mm) ID & Clamps Drain Line Vent Tee 3/4. (18.1mm) PVC or 1/2. (12.7mm) CPVC (Field supplied) A07708 Fig. 8 -- All Models Vent Through Right Side (Upflow) 359AAV 9 Elbow Tube Black Rubber 1/2. ID (13 mm) & Clamps (Loose Parts Bag) AIR FLOW OFF ON AIR FLOW 25--24--69 Single Pressure Switch Detail Dual Pressure Switch Tee Trap White PVC (loose parts bag) Flexible Tubing Connector, 3/16. (5 mm) OD (loose parts bag) EXHAUST Cut Here Drain Tube Black, 5/8. (16 mm) ID Corrugated Cut at straight section Leave room for clamp WARNING Move Caps to top of trap Relief Tube, Extension Black Rubber, 3/16. (5 mm) ID Cut to fit (loose parts bag) INLET On Some Models ONLY Either: The PVC Drain Tee or a field supplied 2. (51 mm) Plastic Cap Yellow or black Vent Drain & Clamps Rotate downward 5° to 10° NOTE: Built--in channel will be angled 5° to 10° also. SIDE VIEW Coupling & Clamps (Optional) Trap Connection “Clamp ears” Pointed OUT Preassemble & insert into furnace 2. (51 mm) PVC Coupling Relief Tube Black Rubber 3/16. (5 mm) ID Drain Tube Black Rubber 1/2. ID (13 mm) & Clamps Barbed Coupling 1/2. (13 mm) OD (loose parts bag) PVC Tee A07767 Fig. 9 -- Downflow Left Side Vent and Trap 359AAV 10 AIR FLOW OFF ON Drain Connector Black PVC 3/4. CPVC (Loose parts bag) Trap Connection “Clamp ears” Pointed OUT Preassemble & insert into furnace Single Pressure Switch Detail Dual Pressure Switch Tee Trap White PVC (loose parts bag) Drain Tube Corrugated Black, 5/8. (16 mm) WARNING Move Caps to top of trap Drain Tube Black Rubber, 5/8. ID (16 mm) Cut to fit & Clamps (loose parts bag) AIR FLOW Barbed Coupling 1/2. (13 mm) OD (Loose Parts Bag) Drain Hose Black Rubber 1/2. (13 mm) ID Cut to Fit & Clamps Either: The PVC Drain Tee or a field supplied 2. (51 mm) PVC Tee Rotate downward 5° to 10° NOTE: Built--in channel will be angled 5° to 10° also. SIDE VIEW Plastic Cap Yellow or black Vent Drain & Clamps INLET On Some Models ONLY 2. (51 mm) PVC Coupling Coupling & Clamps (Optional) Relief Tube Black Rubber 3/16. (5 mm) ID Elbow Tube Black Rubber 1/2. (13 mm) ID & Clamps (Loose Parts Bag) ID & Clamps PVC X 1/2.(13 mm). (19 mm) A07768 Fig. 10 -- Downflow Right Side Vent and Trap 359AAV 11 AIR FLOW OFF ON Plastic Caps Yellow or black Vent Drain & Clamps Trap Connection “Clamp ears” Pointed OUT Preassemble & insert into furnace 25--24--70 Single Pressure Switch Detail Dual Pressure Switch Tee Trap White PVC (loose parts bag) Cap and Clamp Open End Flexible tubing connector 3/16. (4.8mm) OD (Loose Parts Bag) EXHAUST Alternate Orientation Field Supplied Tee Cut Here Cut at straight section Leave room for clamp Relief Tube Extension Black Rubber 3/16. (4.8mm) ID Cut to Fit (Loose Parts Bag) AIR FLOW Coupling & Clamps (Optional) Relief Tube Black Rubber 3/16. (4.8mm) ID Drain Tube Black Rubber 1/2. (12.7mm) ID & Clamps Drain Tube Corrugated 5/8. (15.9mm) ID & Clamps Representative drawing only, some models may vary in appearance. Remove KO before mounting Trap A07709 Fig. 11 -- Horizontal Left Through Top 359AAV 12 AIR FLOW OFF ON 25--24--70a Single Pressure Switch Detail Dual Pressure Switch Tee Trap White PVC (loose parts bag) WARNING Move Caps to top of trap Flexible Tube Connector 3/16. (4.8mm) OD (Loose Parts Bag) Elbow Tube Black Rubber 1/2. (12.7mm) ID & Clamps (Loose Parts Bag) EXHAUST Alternate Orientation Field Supplied Tee Cut Here Cut at straight section Leave room for clamp Relief Tubing Extension Black Rubber 3/16. (4.8mm) ID Cut to Fit (Loose Parts Bag) Yellow or black Plastic Cap Vent Drain & Clamps Drain Tube Corrugated 5/8. (15.9mm) ID & Clamps Level or Sloped towards Tee INLET On Some Models ONLY Relief Tube Black Rubber 3/16. (4.8mm) ID Drain Tube Black Rubber 1/2. (12.7mm) ID & Clamps Barbed Coupling 1/2. (12.7mm) OD (Loose Parts Bag) Representative drawing only, some models may vary in appearance. A07710 Fig. 12 -- Horizontal Left Side Vent 359AAV 13 OFF ON AIRFLOW 3/16. (4.8mm) ID...