Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
20802 Kensington Boulevard, Lakeville, MN 55044 USA • 1-888-427-3973 THIS PRODUCT MAY BE COVERED BY ONE OR MORE OF THE FOLLOWING PATENTS: (United States) 4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada) 1297749, 2195264, 2225408; (Australia) 543790;586383; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending. Heat & Glo • SL-550TRSI-AUE • 2079-902 Rev. B • 7/06 PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING THIS APPLIANCE. MODEL SL-550TRSI-AUE IS AUSTRALIAN GAS ASSOCIATION APPROVED FOR NATURAL GAS OR PROPANE AS A BALANCED FLUE HEATER. Refer to the appliance data plates for gas consumptions and pressures. Installation of this appliance should only be carried out by an authorized person in accordance with the manufacturer's instructions. Appliance is to be installed in full compliance with the National Gas Installation Standard AS5601, the manufacturer's instructions, and any local authorities' requirements for gas, electrical and building regulations. This appliance and its components are tested and safe when installed in accordance with this Installation Manual. Report to your dealer any parts damaged in shipment, specifically check glass condition. The gas logs and flue system components are in separate packages. Read all instructions before starting installation and follow these instructions carefully during installation to ensure maximum benefit and safety. Failure to follow them will void your warranty and may present a fire hazard. The Heat & Glo, a brand of Hearth & Home Technologies Inc. warranty will be voided by, and Heat & Glo, a brand of Hearth & Home Technologies Inc. disclaims any responsibility for the following actions: • Installation of any damaged heater or flue system component • Modification of the heater or balanced flue system installation other than as instructed by Heat & Glo, a brand of Hearth & Home Technologies Inc. • Improper positioning of the gas logs or the glass door • Installation and/or use of any component part not manufactured or approved by Heat & Glo, brand of Hearth & Home Technologies Inc., not withstanding any independent testing laboratory or other party approval of such component part or accessory. IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these installation instructions may result in a possible fire hazard and will void the warranty. Save this Manual for future reference. Heat & Glo, a brand of Hearth & Home Technologies, Inc. 20802 Kensington Blvd., Lakeville, MN 55044, USA Copyright 2006 • Printed in U.S.A. Heat & Glo Quality Systems registered by SGS ICS Heat & Glo • SL-550TRSI-AUE • 2079-902 Rev. B • 7/06 TABLE OF CONTENTS 1.0 Installation Instructions......................................................................................... 5 1.1 Introduction ................................................................................................... 6 1.2 Flue System Approvals and Installation ......................................................... 8 1.3 Connecting the Gas Supply ........................................................................ 22 1.4 Ignition System Wiring ................................................................................ 23 1.5 Blower Fan ................................................................................................. 24 1.6 Finishing .................................................................................................... 25 1.7 Installer Testing ........................................................................................... 26 1.8 Log Placement ........................................................................................... 27 2.0 Operating Instructions ....................................................................................... 30 2.1 Safety and Lighting Information ................................................................... 31 2.2 Fan Operation ............................................................................................ 32 3.0 Servicing and Maintenance ............................................................................... 32 3.1 Removal of Covers for Servicing ................................................................ 33 3.2 Removal of Components for Service .......................................................... 33 3.3 Parts Replacement.....................................................................................33 3.4 Adjustments and Replacement Parts ...........................