Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Depiladoras - HP6401/50 (708.7 kb)
Depiladoras - HP6401/50 (591.93 kb)
Resumen del manual
Electromagnetic fields (EMF)
- Keep the appliance and the adapter dry (Fig. 11).
EnGlIsH
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
Cleaning the appliance
Introduction
properly and according to the instructions in this user
1 Push the epilating head in the direction of the
Congratulations on your purchase and welcome to
manual, the appliance is safe to use based on scientific
arrows on the back of the appliance (1) and remove
Philips! To fully benefit from the support that Philips offers, evidence available today.
it (2) (Fig. 12).
register your product at www.philips.com/welcome.
Using the appliance
2 Rinse the epilating head under the tap for 5-10
With your new epilator you can remove unwanted hair
seconds while turning it.
quickly, easily and effectively. Its rotating discs catch even
Note: Clean the epilating head before first use.
the shortest hairs (down to 0.5mm) and pull them out
3 Shake the epilating head firmly (Fig. 13).
by the root.
Epilation tips
4 Dry the epilating head thoroughly with a tea towel.
Efficiency cap (HP6402/HP6401 only)
- When you use the appliance for the first time, we
Your epilator comes with an efficiency cap that ensures
advise you to try it out on an area with only light hair Note: Make sure the epilating head is completely dry before
ideal contact with the skin so that hairs are removed
growth to get accustomed to the epilation process.
you place it back onto the appliance.
effectively in one stroke.
- Epilation is easier just after taking a bath or shower.
Make sure your skin is completely dry when you
Cleaning the efficiency cap (HP6402/HP6401
only)
General description (Fig. 1)
start epilating.
A Efficiency cap (HP6402/HP6401 only)
- Make sure your skin is clean, entirely dry and free
1 Remove the efficiency cap from the epilating
B Epilating discs
from grease. Do not use any cream before you start
head (Fig. 14).
C Epilating head
epilating.
2 Rinse the efficiency cap under the tap while turning
D On/off slide
- Epilation is easier and more comfortable when the
it.
- O = off
hair has the optimum length of 3–4 mm. If the hairs
- I = normal speed
are longer, we recommend that you shave first and
3 Dry the efficiency cap before you use or store it.
- II = high speed
epilate the shorter regrowing hairs after 1 or 2
E Socket for appliance plug
weeks.
Note: Make sure the efficiency cap is completely dry before
F Adapter
- When you epilate for the first time, we advise you to you place it back onto the epilating head.
G Small plug
epilate in the evening, so that any reddening that
develops can disappear overnight.
Replacement
Important
- While epilating stretch your skin with your free hand. All parts of the appliance can be replaced. If you need
Read this user manual carefully before you use the
This lifts up the hairs and helps to minimise the
to replace one the parts, go to your Philips dealer or an
appliance and save it for future reference.
pulling sensation.
authorised Philips service centre.
Noise level: Lc = 72 dB(A)
- For optimal performance, place the appliance on
the skin at right angles (90°) with the on/off slide
Environment
Danger
pointing in the direction in which you are going to
- Do not throw away the appliance with the normal
- Keep the appliance and the adapter dry.
move the appliance. Guide the appliance across the
household waste at the end of its life, but hand it in
- Do not use the appliance near or over a washbasin
skin against the direction of hair growth in a slow,
at an official collection point for recycling. By doing
or bath filled with water (Fig. 2).
continuous movement without exerting any pressure.
this, you help to preserve the environment (Fig. 15).
- Do not use the appliance in the bath or in the
- On some areas, hair may grow in different directions.
shower (Fig. 3).
In this case, it may be helpful to move the appliance
Guarantee & service
- If you use the appliance in the bathroom, do not use
in different directions to achieve optimal results.
If you need service or information or if you have a
an extension cord (Fig. 4).
- To relax the skin, we advise you to apply a
problem, please visit the Philips website at
Warning
moisturising cream after epilation.
www.philips.com or contact the Philips Consumer Care
- Only use the appliance in combination with the
- Fine hair that regrows might not grow up to the
Centre in your country (you find its phone number in
adapter supplied.
skin surface. The regular use of an exfoliating sponge
the worldwide guarantee leaflet). If there is no Consumer
- Do not use the appliance or the adapter if it is
or cream (e.g. during showering) helps to prevent
Care Centre in your country, go to your local Philips
damaged.
ingrowing hair as the gentle scrubbing action
dealer.
- If the adapter is damaged, always have it replaced
removes the upper skin layer and fine hair can get
with one of the original type in order to avoid a
through to the skin surface.
hazard.
Connecting the appliance
- The adapter contains a transformer. Do not cut
off the adapter to replace it with another plug, as
1 Insert the appliance plug into the appliance (Fig. 5).
this causes a hazardous situation.
- This appliance is not intended for use by persons
2 Insert the adapter into the wall socket.
(including children) with reduced physical, sensory
Epilating the legs
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
We advise you to start epilating with the efficiency cap
or instruction concerning use of the appliance by a
(HP6402/HP6401 only).
person responsible for their safety.
If you already have some experience with epilation, you
- Children should be supervised to ensure that they
can simply use the epilating head without any attachment.
do not play with the appliance.
1 HP6402/HP6401 only: Put the efficiency cap on the
Caution
epilating head (Fig. 6).
- This appliance is only intended for removing women’s 2 Select the desired speed to switch on the
body hair from the legs. Do not use it for any other
appliance (Fig. 7).
purpose.
Preferably use speed II. Switch to speed I for areas with
- To prevent damage and injuries, keep the running
little hair growth, for hard-to-reach areas and for areas
appliance (with or without attachment) away
where bones are located directly beneath the skin, such
from scalp hair, eyebrows, eyelashes, clothes, threads,
as knees and ankles.
cords, brushes etc.
- Do not use the appliance on irritated skin or skin
3 Stretch the skin with your free hand to make the
with varicose veins, rashes, spots, moles (with hairs)
hairs stand upright.
or wounds without consulting your doctor first.
4 Place the epilator perpendicularly onto the skin
People with a reduced immune response or people
with the on/off slide pointing in the direction in
who suffer from diabetes mellitus, haemophilia or
which you are going to move the appliance (Fig. 8).
immunodeficiency should also consult their doctor
first.
5 Move the appliance slowly over the skin, against the
- Your skin may become a little red and irritated the
direction of hair growth. (Fig. 9)
first few times you use the epilator. This phenomenon Press the appliance lightly onto the skin.
is absolutely normal and quickly disappears. As
Cleaning and maintenance
you use the appliance more often, your skin gets
used to epilation, skin irritation decreases and
Note: Make sure the appliance is switched off and
regrowth becomes thinner and softer. If the irritation
unplugged before you start to clean it.
has not disappeared within three days, we advise you
to consult a doctor.
Never use scouring pads, abrasive cleaning agents or
- Do not use the epilating head or efficiency cap
aggressive liquids such as petrol or acetone to clean the
(HP6402/HP6401 only) if it is damaged or broken, as appliance.
this may cause injury.
- Never rinse the appliance or the adapter under the
tap (Fig. 10).
2
4203.000.4386.4
...