Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.51 mb Nombre del archivo: Idioma del manual:

Connecting the appliance 1 Insert the appliance plug into the appliance (Fig. 5). 2 Insert the adapter into the wall socket. Epilating the legs If you are new to epilation, we advise you to start epilating with the hair-lifting attachment with massage element. This attachment ensures optimal hair lifting, relaxes the skin and minimises the pulling sensation of epilation. If you already have some experience with epilation, you can simply use the epilating head without any attachment. Only use the hair-lifting attachment with massage element on your legs. 1 Put the hair-lifting attachment with massage element on the epilating head (Fig. 6). 2 Select the desired speed to switch on the appliance (Fig. 7). Preferably use speed II. Switch to speed I for areas with little hair growth, for hard-to-reach areas and for areas where bones are located directly beneath the skin, such as knees and ankles. 3 Stretch the skin with your free hand to make the hairs stand upright. 4 Place the epilator perpendicularly onto the skin with the on/off slide pointing in the direction in which you are going to move the appliance (Fig. 8). 5 Move the appliance slowly over the skin, against the direction of hair growth. Press the appliance lightly onto the skin. Shaving the underarms and bikini line Use the shaving head to shave sensitive areas such as the bikini line. Note: The shaving head can only be used at speed setting I. 1 Push the epilating head in the direction of the arrows on the back of the appliance (1) and remove it from the appliance (2) (Fig. 9). 2 Put the shaving head on the appliance (1) and push it against the direction of the arrows on the back of the appliance (2) to fix it. (Fig. 10) 3 Switch on the appliance. (Fig. 11) Note: Speed II does not work when the shaving head is attached. 4 Stretch the skin with your free hand. When shaving the underarms, raise your arm to stretch the skin. 5 Place the appliance perpendicularly onto your skin, with the on/off slide pointing in the direction in which you are going to move the appliance. 6 Move the appliance against the direction of hair growth. (Fig. 12) Note: Make sure that the shaving foil with integrated trimmer is always fully in contact with the skin. -- Shave your bikini line as shown in the figure. (Fig. 13) -- Shave your underarms as shown in the figure. Move the appliance in different directions. (Fig. 14) 7 When you have finished shaving, switch off the appliance and clean the shaving head (see chapter ‘Cleaning and maintenance’). 8 Put the protection cap on the shaving head when you store the appliance. Pretrimming your legs before epilation You get the best epilating results in the most comfortable way when the hairs are not too long (approx. 4mm). If the hairs are longer, pretrim them to this length using the shaving head with the comb attachment. Note: The shaving head can only be used at speed setting I. 1 Push the epilating head in the direction of the arrows on the back of the appliance (1) and remove it from the appliance (2) (Fig. 9). 2 Put the shaving head on the appliance (1) and push it against the direction of the arrows on the back of the appliance (2) to fix it (Fig. 10). 3 Put the comb on the shaving head. 4 Follow steps 3 to 6 in section ‘Shaving the underarms and bikini line’. 5 When you have finished pretrimming, switch off the appliance and clean the shaving head (see chapter ‘Cleaning and maintenance’). 6 Put the protection cap on the shaving head when you store the appliance. Cleaning and maintenance Note: Make sure the appliance is switched off and unplugged before you start to clean it. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. -- Never rinse the appliance or the adapter under the tap (Fig. 15). -- Keep the appliance and the adapter dry (Fig. 16). Cleaning the attachments 1 Remove the hair-lifting attachment with massage element from the epilating head (Fig. 17). -- Remove the shaving head comb attachment by pulling it off the shaving head (Fig. 18). 2 Remove loose hairs from the attachments. 3 Rinse the attachments under the tap while turning them. 4 Dry the attachments before you use or store them. Cleaning the epilating head 1 Push the epilating head in the direction of the arrows on the back of the appliance (1) and remove it (2) (Fig. 9). 2 Remove loose hairs with the cleaning brush (Fig. 19). 3 Rinse the epilating head under the tap for 5-10 seconds while turning it (Fig. 20). 4 Shake the epilating head firmly (Fig. 21). Dry the epilating head thoroughly with a tea towel. Note: Make sure the epilating head is completely dry before you place it back onto the appliance. Cleaning the shaving head 1 Push the shaving head in the direction of the arrows on the back of the appliance (1) and remove it (2). (Fig. 22) 2 Remove the shaving foil from the shaving head. (Fig. 23) 3 Rinse the shaving foil and the inside of the shaving head under the tap for 5-10 secon...

Descargar ahora

Introduzca dos números de la imagen: