Iniciar sesión:
Votos - 1, Puntuación media: 3 ( )

Manual de usuario Grizzly, modelo JACK STAND H8365

Fabricar: Grizzly
Tamaño del archivo: 272.61 kb
Nombre del archivo: h8365_m.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Make sure that the saddle is centered under the load point. Do not over-extend the load or the load may shift and swing. 3. Slowly lower the component onto the jack stand, making sure that the load point is still centered and all three corners of the stand base are still on the ground. To remove the jack stand, secure or remove the component until the jack stand can be lowered and removed. Remove the jack stand while the vehicle is securely supported. COPYRIGHT © DECEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC., REVISED FEBRUARY, 2008 (JM) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #JM10211 PRINTED IN CHINA H8365 Parts Breakdown and Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8365001 SADDLE ASSEMBLY 2 P51106 THRUST BEARING 51106 3 PH8365003 GUIDE 4 PH8365004 LEG 5 PH8365005 SMALL BRACE 6 PH8365006 LARGE BRACE 7 PH8365007 ROLL PIN 2 X 25 8 PB09M HEX BOLT M8-1.25 X 20 9 PW01M FLAT WASHER 8MM 10 PN03M HEX NUT M8-1.25 11 PN02M HEX NUT M10-1.5 12 PW04M FLAT WASHER 10MM 13 PB01M HEX BOLT M10-1.5 X 30 14 PH8365014 ID LABEL 15 PH8365015 WARNING LABEL If you need help with the Model H8365, call our Technical Support line at: (570) 546-9663....

Otros modelos de este manual:
Sounders - JACK STAND H8365 (272.61 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría