Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
WAF513C, WAF1013C 2 Attach Rails 3 Insert Fireplace Grate 4 Insert Ash Receiver 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard, level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 30 minutes. Assembly Instructions Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. 5 6 Attach Cooking Grid Supports, Hood and Insert Cooking Grid A x 4 7 Attach Top A x 2 8 Attach Spark Guard Door 5 Attach Back and Side Spark Guards Outdoor Fireplace Model No. WAF513C, WAF1013C WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting with wood 1. Make sure all of there is no ash in the bottom of the bowl and ash receiver. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Use a long match to light kindling or firestarter. 5. Using heat resistant gloves and fireplace tool to replace spark guard door once the kindling or firestarter is lit. Tending the Fire You may need to shift and/or add logs for an ideal experience. CAUTION: Do NOT place hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using heat resistant gloves and fireplace tool to carefully open spark guard door. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top of coals. Be careful not to shift ashes. 5. Using heat resistant gloves and fireplace tool to replace spark guard door. Cooking Instructions 1. Using heat resistant gloves, carefully open spark guard d...
Otros modelos de este manual:chimeneas - WAF1013C (963.11 kb)
chimeneas - FIREPLACE WAF513C (963.11 kb)