|
Resumen del manual
Arched Door None 1 ea. Instruction Sheet GENERAL INFORMATION These arch door kits may be used with gas fireplace models listed in Tables 1 & 2. CAUTION INSTALL ONLY WHEN THE FIREPLACE IS OFF AND COLD! INSTALLATION INSTRUCTIONS Part A: Elite Series Fireplaces Step 1.Slightly lift and pull the existing top radiant panel/hood assembly away from the fireplace, or pull hood and slightly lift and pull the existing louver assembly away from the fireplace. Step 2. Lift and pull the existing top and bottom bustle away from the fireplace. Step 3.Open the bottom compartment door (either a radiant panel or louver assembly) by pushing in simultaneously the left and right top corners of the door (the door is hinged at the bottom). Step 4.Remove the bottom compartment door by sliding the hinge pin, located at the door’s left side, to the right until it disengages from the left corner post hole. Pull the door diagonally to the left, away from the fireplace. Step 5.Remove the modesty panel as follows: lift the modesty panel by the tab on the panel’s right end, pull the right end of the panel away from cabinet and thenpull thepanel diagonallyout of the cornerpost slots on the left side of the unit. Remove the modesty panel carefully, so that none of the wires become loose or disconnected. Arched Door Glass Frame Corner Tabs- At Figure 1 The Four Corners Step 6.Open the glass door latche(s) located underneath the firebox. Step 7.Remove the door from the fireplace by swinging the bottom of the door outward and lifting it up and away. Step 8.Center the arch door over the glass frame as shown in Figure 1. Press the arch door onto the glass frame and bend the four corner tabs into the frame’s U-channel as shown in Figure 2. CAT. NO. MODEL WHERE USED 81L34 ADK35CPB EDV3530, ED3530 81L35 ADK40CPB EDV4035, ED4035-2, LMDV-4035, SSDV-4035, MPD4035, EDVST, EDST-2, EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBST-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 81L36 ADK45CPB EDV4540, ED4540-2, MPD4540 81L37 ADK24CPB EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L05 ADK33CPB MDR3328, MDT3328, MPDT3328, MPDR3328, LMDVR-3328 26M43 ADK35CMPB MPD3530, MPD35ST, MPD35PF, MPB35ST, LMDV-3530, SSDV-3530 H7026 ADK22CMPB MPD35PF Table 1 - Arch Door Kit with Brass Trim CAT. NO. MODEL WHERE USED 98L68 ADK35CBS EDV3530, ED3530 98L69 ADK40CBS EDV4035, ED4035-2, LMDV-4035, SSDV-4035, MPD4035, EDVST, EDST-2, EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBST-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L70 ADK45CBS EDV4540, ED4540-2, MPD4540 98L71 ADK24CBS EDVPF, EDPF-2, EDVCR, EDCR-2, EDVCL, EDCL-2, EBVPF, EBPF-2, EBVCR, EBCR-2, EBVCL, EBCL-2 98L62 ADK33CBS MDR3328, MDT3328, MPDT3328, MPDR3328, LMDVT-3328, LMDVR-3328 26M44 ADK35CMBS MPD3530, MPD35ST, MPD35PF, MPB35ST, LMDV-3530, SSDV-3530 H7027 ADK22CMBS MPD35PF Table 2 - Arch Door Kit with Brushed Stainless Steel Trim NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Bend The Arch Tab 90 Degrees Int...
Otros modelos de este manual:chimeneas - ADK22CMBS (116.16 kb)
chimeneas - ADK24CBS (116.16 kb)
chimeneas - ADK24CPB (116.16 kb)
chimeneas - ADK33CBS (116.16 kb)