Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Should any conflict occur between these instructions and these regulations then the regulations shall apply. All electrical connections should meet the requirements of UK Building Regulations (England and Wales - Document P/ Scotland - Part N). Your local Building Control Office would be happy to advise should questions arise, regarding the requirements of the regulations. The fireplace should be fitted by a HETAS (CB only) registered installer, or approved by your local building control officer. Your Stovax dealer should be able to arrange this service for you. Any gas appliance installation completed in conjunction with the fireplace must be completed by a CORGI registered gas engineer, in accordance with the manufactures installation instructions. Your Stovax dealer should be able to arrange this service for you. Your building insurance company may also require you to inform them that you have installed a new heating appliance, so check with your insurers that your cover is still valid after installing the fireplace. When completing the installation and building works you should comply with your responsibilities under the Health and Safety at Work Acts, and any new regulations, which may be introduced during the lifetime of these instructions. A faulty installation could cause danger to the inhabitants and structure of the building. 2 SITE REQUIREMENTS / INSTALLATION Hearth The constructional and superimposed hearth must meet the requirements of the Building Regulations for the fire and surround to be fitted. Flue The flue system should meet the requirements of the Building Regulations for the fire to be fitted and the fuel to be used. The flue exit from the building should be positioned to comply with the requirements of the Building Regulations. Any existing flue should be confirmed as suitable for the new intended use, as defined in the Building Regulations. Any existing flue or chimney system must be inspected and swept by a NACS registered (UK only) chimney sweep, to confirm that the system is structurally sound and free from any obstructions. Suitable access should be provided to enable the collection and removal of debris. Provision should be made to sweep and inspect the flue when the appliance is installed. No other heating appliances should be connected to, or share, the same flue or chimney system. Check the flue draught. This should be done with all windows and doors closed and any extraction fans in this or adjoining rooms running at maximum speed. Note: A guide containing general information on Chimneys and Flues is obtainable from: - The British Flue & Chimney Manufacturers' Association, FETA 2 Waltham Court, Milley Lane, Hare Hatch Reading, Bucks , RC10 9TH Tel : - 01189 403416 e-mail :- info@feta.co.uk Where a hearth, fireplace, flue or chimney is provided or extended (including cases where a flue is provided as part of refurbishment work), information essential to the correct appliance and use of t...
Otros modelos de este manual:chimeneas - 8902 (117.77 kb)
chimeneas - 8901 (117.77 kb)
chimeneas - 8904 (117.77 kb)