Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Burner Assembly LP Gas Models All Models • Remove the burner assembly and check for damage. Do not use damaged components. • Position the burner assembly in the desired location. This location must be adjacent to the gas supply line. You must have easy access to the gas valve control knob after it is installed and connected to the gas supply because the ON/OFF gas valve is used to turn the burner on and off. Natural Gas Models • Connect the ON/OFF gas valve of the appliance to the incoming gas supply line. See Figure 6.1. Make certain all gas connections are tight. • Turn the ON/OFF valve at the appliance slowly to the “ON” position. All connections must be tightened and checked for leaks with a commercially available, non-corrosive leak check solution. Be sure to rinse off the solution when done leak testing. Locating Button Check fittings for leaks "ON/OFF" Valve Figure 6.1 Natural Gas Burner Assembly • Make sure the tank valve is turned completely off (clockwise). • Ensure the tank valve has the proper external mating threads (tank valve marked “USE WITH TYPE 1”). • Inspect the hose shipped with the appliance for any damage. Do not use if there is evidence of damage. • Connect the end of the hose onto the ON/OFF gas valve of the appliance. Make sure it is secured tightly. • Connect the regulator assembly to the tank valve. Hand tighten only (clockwise). Do not use a wrench to tighten! Use of a wrench may damage the quick closing nut and result in a hazardous condition. See Figure 6.2. • Position the hose out of pathways where people might trip over it or in areas where the hose might be subject to accidental damage. • Open the tank valve fully (counterclockwise). Turn the ON/ OFF valve slowly to the “ON” position. All connections must be tightened and checked for leaks with a commercially available, non-corrosive leak check solution. Be sure to rinse off the solution when done leak testing. If a leak is found, turn the tank valve off and do not use the appliance until repairs can be made. Locating Button "ON/OFF" Gas Valve Flex Connector Check fittings for leaksPropane Regulator Hose Burner Assembly Figure 6.2 Propane Gas Burner Assembly Heat & Glo LifeStyle Collection • Patio Campfire • Rev B • 08/08 B. Log Assembly • Check all logs and log base for damage. Do not use damaged or broken components! • Position the log base over the burner making sure to align the dimple in the log base over the locating button on the burner top (see Figure 2.1 for locating button). • Position the logs by placing the corresponding letter/number combinations located on the logs (Figure 6.3) with those on the log base (Figure 6.4). See Figure 6.5 for completed log assembly. 1A 1C 1B 4C4A 4B Log #1 Log #4 2A 3C 3A 3B 3C Log #2 Log #3 Figure 6.3 Numbered Logs Figure 6.4 Log Base (Top View) Figure 6.5 Completed Log Assembly Heat & Glo LifeStyle Collection • Patio Campfire • Rev B • 08/08 7 77 Operating Instructions A. Before Lighting Appliance LP (Propane) • Before lighting this appliance, ensure both the LP tank valve and the manual shutoff valve are closed. Open the LP tank valve first, THEN the manual shutoff valve. This is required due to built-in safety features of your LP tank. Natural Gas • Before lighting this appliance, ensure the manual shutoff valve is open. Before operating this appliance, have a qualified technician: • Inspect the burner before each use of the gas log set. If there is any evidence that the burner is damaged, it must be replaced before operating. • Review proper placement of logs. • Check the air shutter adjustment. • Ensure that there are no gas leaks. • Ensure that the flow of combustion and ventilation air is not obstructed. WARNING Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or the gas supplier. WARNING Do NOT use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water. WARNING • • • • Fire Risk Burn Risk HOT! DO NOT TOUCH. SEVERE BURNS MAY RESULT. CLOTHING IGNITION MAY RESULT Glass and other surfaces are hot during operation and cool down. Keep children away. CAREFULLY SUPERVISE children in same room as appliance. Alert children and adults to hazards of high temperatures. Keep clothing, furniture, draperies and other combustibles away. Heat & Glo LifeStyle Collection • Patio Campfire • Rev B • 08/08 B. Lighting the Appliance FOR YOUR SAFETY, READ BEFORE LIGHTING WARNING! If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury and/or loss of life. A. This appliance must be lit by hand. When lighting, follow these instructions exactly. B. Before lighting, smell...
Otros modelos de este manual:chimeneas - PCFML-HNG (1.52 mb)