Votos - 3, Puntuación media: 4 ( )

Fabricar: Grizzly Tamaño del archivo: 327.31 kb Nombre del archivo: Idioma del manual:

This expressed warranty gives you specific legal rights, and you may also have other rights which vary from state to state. NOTE: Paint finish may burn off under normal use and therefore it carries no warranty. CAUTION: Never move the unit while in use. If moving becomes necessary, do not touch body or lid as they may be very hot. GENERAL INSTRUCTIONS FOR SAFE USE OF FIREPLACE: 1. Do not burn trash, leaves, paper, cardboard or plywood in the fireplace. The use of seasoned hardwood is recommended. Avoid using softwood such as pine or cedar because they are likely to throw sparks. 2. Keep all screws and nuts tight to be sure fireplace is in safe working condition. Inspect on regular basis to ensure that the fireplace is operational. NOTE: After repeated use, a discoloration of the metal may occur WARNING CARBON MONOXIDE HAZARD Burning charcoal gives off carbon monoxide, which has no odor and can kill you. DO NOT burn charcoal inside homes, vehicles or tents. Use only in well ventilated areas. LEGS FIRE SCREEN STEP 6 (GRIZZLY) Attach AIR DAMPERS: Connect AIR DAMPERS to LID (H) by threading AIR DAMPER TOPS (U) and AIR DAMPER BASES (V) with SMALL AIR DAMPER BOLTS (T) and WING NUTS (W). STORAGE (BOTH MODELS): FIRE SCREEN can be stored inside the LID and BASE on both models. The LEGS can be stored inside the LID and BASE in the GRIZZLY CUB. WARNING: Do not move while in use. If moving becomes necessary, use caution and protective gloves when handling fireplace. T U V W H PARTS LIST/IDENTIFICATION: PART NUMBER DESCRIPTION QUANTITY A SHORT BOLTS 4 (GRIZZLY), 2 (GRIZZLY CUB) B, BB HANDLES, HANDLE BRACKET 2 C LONG BOLTS 2 D (GRIZZLY) LID HANGER BRACKET 1 E SMALL WASHER 12 F NUTS 12 G (GRIZZLY CUB) LID HANGER BRACKET 1 H THE LID 1 I LOCK WASHERS 10 J FIRE SCREEN 1 K COOKING GRILL 1 L THE BOWL 1 M BOWL HANDLE BRACKET 1 N (GRIZZLY) WHEEL SUPPORT AXLE 1 O (GRIZZLY) TUBE LEG 1 P (GRIZZLY) WHEEL TUBE LEG 1 Q (GRIZZLY) LARGE NUTS FOR WHEELS 2 R (GRIZZLY) WHEEL 2 S BOLTS 6 T SMALL AIR DAMPER BOLT 1 U AIR DAMPER TOP 2 V AIR DAMPER BASE 2 W WING NUT 2 X WOOD GRATE 1 Y (GRIZZLY CUB) LOCKING LEGS (SMALL) 4 Z FEET 2 (GRIZZLY), 4 (GRIZZLY CUB) AA STABILIZER PLATE 1 Please read all instructions and warnings before assembly. TOOLS REQUIRED: Phillips head screwdriver Crescent wrench or socket wrench set. NOTE: Do not completely tighten screws until the assembly is complete. For easier assembly we recommend two people assemble this product. 8 STEP 5 (GRIZZLY) Attach HANDLE to LID: First thread a LONG BOLT (C) through HANDLE (B) and HANDLE BRACKET (BB), and fasten with a SMALL WASHER (E) and a NUT (F). Next, attach HANDLE to LID (H) and the LID HANGER BRACKET (D) to inside of LID (H) using two (2) BOLTS (A), SMALL WASHERS (E), LOCK WASHERS (I) and NUTS (F). STEP 5 (GRIZZLY CUB) Attach HANDLE to LID: First thread a LONG BOLT (C) through HANDLE (B) and HANDLE BRACKET (BB), and fasten with a SMALL WASHER (E) and a NUT (F). Next, attach HANDLE to LID (H) and the LID HANGER BRACKE...

Descargar ahora

Introduzca dos números de la imagen: