Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
Use heat-resistant gloves or hot pads when contacting handles. Use long, sturdy fireplace tools when adding or moving logs. Use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. 3 2 3 4 5 Hardware A Screw M5x10 Black Nickel Plated Head 2 pcs B Nut M8 Black Nickel Plated Hex 16 pcs C Lock Washer M5 Black Nickel Plated 2 pcs D Lock Washer M8 Black Nickel Plated 16 pcs Tools Required for Assembly (Included) M8 Wrench Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Exploded View 1 Parts List 1 Spark Guard Handle 55-12-552 2 Spark Guard 55-05-071 3 Wood Grate 55-12-551 4 Bottom Bowl 55-12-703 5 Hearth 55-05-541 6 Leg (4) 58-05-023 6 Outdoor Fireplace Model No. WAD820SP 2 Attach Legs B x 16 D x 16 4 Insert Bottom Bowl 3 Attach Spark Guard A x 2 C x 2 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard, level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 20 minutes. Assembly Instructions Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. 5 5 Insert Wood Grid and Spark Guard WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting with wood 1. Make sure all of there is no ash in the bottom of the bowl and ash receiver. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Use a long match to light kindling or firestarter. 5. Using heat resistant gloves and fireplace tool to replace spark guard once the kindling or firestarter is lit. Tending the fire You may need to shift and/or add logs for an ideal experience. CAUTION: Do NOT place hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using heat resistant gloves and fireplace tool to carefully remove spark guard. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top of coals. Be careful not to shift ashes. 5. Using heat resistant gloves and fireplace tool to replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause damage to outdoor fireplace. Cleaning and Care Inspecting This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life. CAUTION: Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is detected, do NOT operate until repairs are executed. Cleaning This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note: After repeated use, discoloration of the finish may occur. CAUTION: Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. CAUTION: Do NOT use oven cleaner or abrasive cleaners as they will damage this product. CAUTION: Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage the finish. 1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. 2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush. 3. Rinse clean with water. 4. Remove built-up creosote from components with a chimney cleaning product. Tip: Keeping the outdoor fireplace covered when cooled and not in use will help protect it from the elements. Storage CAUTION: Do NOT move or store this outdoor fireplace ...