Iniciar sesión:
Votos - 4, Puntuación media: 4 ( )

Manual de usuario Sierra Products, modelo UV360FP

Fabricar: Sierra Products
Tamaño del archivo: 869.12 kb
Nombre del archivo: 140790_UV36OFPr2.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


DESIGN CERTIFIED TO CSA 4.96 U.S. (2nd ED.) OUTDOOR GAS FIREPLACE -Do not store gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS C Do not try to light any appliance. C Do not touch any electrical switch; do not use any phone in your building. C Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. C If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Save this manual for future reference. Sierra Products, Inc. 5061 Brooks St., Ste B Montclair, CA 91763 P/N 140790r2 03/2007 SAFETY INFORMATION Appliance for Use with Propane Gas: Propane gas hasno odor. An odor-making agent is added to the gas. Theodor aids you in detecting a gas leak. However, the odoradded to the gas can fade. Gas may be present eventhough no odor exists. Use only propane gas. Do not convert the fireplace to use different fuel type. Do not place propane supply tank(s) inside any structure. Locate propane supply tank(s) outdoors. Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this fireplace WARNING: Any changes to this fireplace or its controls can be dangerous. General Safety Concerns 1. If you smell gas C shut off gas supply C do not try to light any appliance C do not touch any electrical switch; do not use anyphone in your building C immediately call your gas supplier from aneighbor’s phone. Follow the gas supplier’sinstructions C if you cannot reach your gas supplier, call the firedepartment 2. This fireplace shall not be installed inside a home 3. Never install the fireplace C in a recreational vehicle C where curtains, furniture, clothing, or otherflammable objects are less than 36 inches from the front, top, or sides of the fireplace. C in high traffic areas C in windy or drafty areas 4. Do not use this fireplace as a wood-burning fireplace. This will void all warranties. 5. Do not add extra logs or ornaments such as pine cones, vermiculite, or rock wool. Using these added items can cause sooting. 6. You must operate this fireplace with the fireplace screen fully closed. Make sure fireplace screen is in place before operating the fireplace. 7. This fireplace is designed to be smokeless. If logs appear to smoke, turn off fireplace and call a qualified service person. Note: During initial operation, slight smoking will occur due to log curing and fireplace burning manufacturing residues. 8. Avoid operating fireplace in high wind conditions. This will alter flames and cause sooting and improper burning. Sooting can discolor surfaces outside the fireplace. 9. This fireplace needs fresh air ventilation to run properly. Do not limit fresh air to front of fireplace. 10. Do not run fireplace where flammable liquids or vapors are used or stored 11. Do not use this fireplace to cook food or burn paper or other objects. 12. Never place any objects in the fireplace or on logs. 13. Fireplace front and screen become very hot when running fireplace. Keep children and adults away from hot surfaces to avoid burns or clothing ignition. The fireplace will remain hot for a time after shut down. Allow surfaces to cool before touching. 14. Carefully supervise young children when they are near the fireplace. 15. Do no use fireplace if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the fireplace and to replace any par of the control system and gas control which has been under water. 16. Turn fireplace off and let cool before servicing. Only a qualified service person should service and repair the fireplace. 17. Operating the fireplace above elevations of 2,500 feet may require derating for proper operation. Contact your local dealer for additional information. UNPACKING 1. Remove trim kit and prefab firebox from the carton. Remove protective plastic wrap and separately wrapped items. You may not want to remove protective plastic on brass plated front components of the fireplace until after installing. 2. Check all items for any shipping damage. If damaged, promptly inform the dealer where you bought the fireplace. 3. Be sure to account for all parts as followed: Qty. Description 1 Pre-built Fireplace 1 Burner Assembly (Installed) 1 Bag lava rock 1 Carton Logs - 6 pcs. WARNING: If the area in which the heater may be operated is smaller than that defined as an unconfined space, provide adequate combustion and ventilation air by one of the methods described in the National Fuel Gas Code, ANSI Z223.1 Section 5.3 or applicable local codes. Follow the National Fuel Gas Code NFPA 54/ANSI Z223.1. regarding gas piping and connections. Local codes may have stricter requirements. Check with local building officials for specifics. INSTALLING 2 3 Installation and repair should be done by a qualifi...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría