Votos - , Puntuación media:
(
)
)
Fabricar: Sony
Tamaño del archivo: 176.93 kb
Nombre del archivo: 3867730111.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
“DOLBY” and the double-D symbol ;are trademarks of Dolby Laboratories Licensing Corporation. The TC-TX373 tape deck is designed only for the DHCMD373/ 333 component system Here are some of the features you can use with this tape deck when connected with the DHC-MD373/333 Mini Hi-Fi component system (see page 4). Auto Power On/Off The tape deck power is tied with the DHC-MD373/333 component system (see page 11). CD Synchro Recording You can easily record a CD onto a tape (see page 10). However, you cannot perform Fade Synchro recording with the DHC-MD373 (see page 11). One Touch Play (DHC-MD333 only) Pressing H or hon the tape deck when the tape deck is off automatically turns on the tape deck and the DHC-MD333, and starts playing a tape if a cassette is inserted (see page 10). Automatic Source Selection You can switch from another source to the tape deck and start playing a tape just by pressing H or h on the tape deck (see page 10). Timer You can wake up to music or record a radio programme at a preset time. For details, refer to “Waking up to music” and “Timer recording radio programmes” in the DHC-MD373/333 component system Instruction Manual. Remote Control You can operate the tape deck using the remote supplied with the DHC-MD373/333. Table of Contents Getting Started Hooking up the system .............................. 4 Operations Playing a tape ............................................ 7 Recording a CD — CD Synchro Recording ............... 10 Recording manually ................................ 12 Additional Information Precautions .............................................. 13 Troubleshooting ...................................... 15 Specifications ............................ Back cover Getting Started Getting Started Hooking up the system Complete steps 1 to 3, 5 to 7 below to hook up your system (DHC-MD373) using the supplied cords. TC-TX373 rear panel Mains lead Audio connecting cords (supplied) AU BUS connecting cable System cable adapter (supplied) DHC-MD373 rear panel Complete steps 4 to 7 below to hook up your system (DHC-MD333) using the supplied cords. 4 Audio connecting cords (supplied) TC-TX373 rear panel Mains lead AU BUS connecting cable DHC-MD333 rear panel Connection to the DHC-MD373 3 (DHC-MD373 only) Firmly connect the system cable adapter 1 (DHC-MD373 only) to the tape control jack on the Firmly connect the AU BUS connecting DHC-MD373. cable to the system cable adapter. BA TC-TX373 Adapter BA Insert the connector firmly all the way. DHC-MD373 TC-TX373 2 (DHC-MD373 only) Peel away the seal paper from the back of the system cable adapter and secure the adapter to the DHC-MD373. Position the adapter so that it does not BA Position the adapter so that it does not cover the ventilation slits. TC-TX373 DHC-MD373 interfere with the audio connecting cords. Note The system cable adapter is used to connect the AU BUS connecting cable for exchanging signals between the tape deck and the DHC-MD373. If you do not connect the system cable adapter and the AU BUS connecting cable firmly, the tape deck and DHC-MD373 may not operate correctly. continued Hooking up the system (continued) Connection to the DHC-MD333 4 (DHC-MD333 only) Firmly connect the AU BUS connecting cable to the AU BUS jack on the DHC-MD333. B A BA TC-TX373 DHC-MD333 Insert the connector firmly all the way. Note The AU BUS connecting cable is used for exchanging signals between the tape deck and the DHC-MD333. If you do not connect the cable firmly, the tape deck and DHC-MD333 may not operate correctly. 5 Connect A to A, and B to B using the audio connecting cords. Insert the plugs into jacks of the same colour. The two audio connecting cords are the same, so you can connect A or B using either cord. TC-TX373 rear panel TAPE L R A B A B IN OUT DHC-MD373 rear panel TC-TX373 rear panel TAPE L R IN OUT A B A B DHC-MD333 rear panel L : sound flow * A l A The sound signals of the CD, MD and TUNER flow through the DHC-MD373/333 to the tape deck when you record to tape. ** B l B The sound signal of the tape deck flows to the DHC-MD373/333 when you play a tape. Operations Operations How to insert the plugs Insert the plugs firmly into the jacks. Not firmly inserted Insert to here. 6 For models with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage. VOLTAGE SELECTOR 110-120V 220-240V 7 Connect the mains lead to a mains after you complete all the connections. If the plug on this tape deck does not fit your mains, detach the supplied adapter from the plug (only for models equipped with an adapter). If there is no sound or the tape does not record at first operation Make sure the plugs are inserted into the jacks firmly. • If the plugs are not inserted into both the A jacks firmly, you may not be able to record the sound of the CD, MD and TUNER onto a tape. • If the plugs are not inserted into both the B jacks firmly, you may not be able to listen to the sound of the tape deck. The plugs of the...
Otros modelos de este manual:- ()