Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• Inserting the tape when the power is off automatically turns on the tape deck only. Press `/1 (power) on the stereo system to turn on the stereo system. • You can switch from another source to the tape deck just by pressing H or h (Automatic Source Selection). • To start playing automatically from the beginning of the tape after fast winding (Auto Play), press H while holding down m (for the top side) or press h while holding down M (for the bottom side). • To listen to a tape recorded with the Dolby noise reduction system, set DOLBY NR to ON. • Using the timer function on the stereo system, you can wake up to music at a preset time. For details, refer to “Wake up to music” in the stereo system operating instructions. When you set the Wake-up timer, DOLBY NR must be set on the tape deck. Note The AMS feature may not work in the following cases: — the blank space between tracks is four seconds or less. — the sound source recorded on the right channel is different from that on the left channel as with a KARAOKE tape. — low volume or low sound continues for a long time. — the TV is too close to the tape deck. Recording a CD — CD-TAPE Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tape, since the tape deck automatically detects the tape type. Tape deck TC-TX595 26 H DOLBY NR* Cassette hx 45 indicator * This tape deck is equipped with the Dolby B-type noise reduction system. 1 Press `/1 (power) on the stereo system to turn on the stereo system. The tape deck turns on automatically. 2 Insert a blank tape. With the side you want to record on facing up 3 Place a CD on the disc tray of the CD player of the stereo system. 4 Set DIRECTION to g to record on one side. Set it to s to record on both sides. If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. 5 Press CD SYNC on the tape deck. The tape deck stands by for recording and the CD player stands by for playback. The indicators on the CD SYNC, zREC, H (for the top side) and S buttons light up. If you want to record starting from the bottom side, press h (for the bottom side) so the indicator on the h button lights up. 6 Press S on the tape deck. Recording starts. If the tape reaches the end of the top side part-way through a track, the tape rewinds and the track is recorded again from its start. After that, recording starts with that track from the beginning of the bottom side during both sides recording, or recording stops during one side recording. To stop recording Press x on the tape deck. Tips • When you press `/1 (power) on the tape deck, only the tape deck turns on. Press `/1 (power) on the stereo system to turn on the stereo system. • Inserting the tape when the power is off automatically turns on the tape deck only. Press `/1 (power) on the stereo system to turn on the stereo system before recording. • The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted. • When you want to reduce the hiss noise in low-level high-frequency signals, set DOLBY NR to ON before step 5. • If the tape reaches the end of the top side during both sides recording, the fadeout feature prevents the track from ending abruptly at the end of the tape (Fade Synchro) (DHC-MD313/333 only). The track is recorded again from the beginning of the bottom side. Notes • You cannot listen to other sources while recording. • When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. Recording manually With manual recording, you can record just the songs you like from a CD, or start recording from the middle of the tape. You can also record a radio programme or MD. Tape deck TC-TX595 26 H DOLBY NR* hx 45 * This tape deck is equipped with the Dolby B-type noise reduction system. 1 Press `/1 (power) on the stereo system to turn on the stereo system. The tape deck turns on automatically. 2 Insert a blank tape. With the side you want to record on facing up continued Additional Information Additional Information Recording manually (continued) 3 Switch the function of the stereo system to the desired sound source (e.g. “CD,” “MD,” “AM”or “FM”). 4 Set DIRECTION to g to record on one side. Set it to s to record on both sides. 5 Press zREC on the tape deck. The tape deck stands by for recording. The indicators on the zREC, H (for the top side) and S buttons light up. If you want to record starting from the bottom side, press h (for the bottom side) so the indicator on the h button lights up. 6 Press S on the tape deck. Recording starts. You can also start recording by pressing the H or h button that is lit. 7 Start playing on the source component. To Press Stop recording x on the tape deck. Pause recording S on the tape deck. Tips • The cassette indicator lig...