Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
Storage container The storage container is ideal for storing excess coffee grounds. Cleaning brush For easy cleaning use the small brush to remove stubborn coffee grinds quickly and with no fuss to ensure quality, fresh grinding results every time. POWERCOARSE/ PERCOLATORMEDIUM/ DRIPFINE/ ESPRESSO481215481215481215 Style of coffee grind The AutoGrinder gives you 3 choices of grind; coarse for percolated coffee, medium for drip filtered coffee and fine for espresso coffee. Sliding grind selector Decide on the style of coffee grind and slide the grind selector to the quantity of ground coffee desired. Cord storage Convenient and clever cord storage, turn the base of the grinder to retract the cord and simply pull the cord out for use. Handy hints for grinding coffee beans with the Sunbeam AutoGrinder • For a good cup of coffee only grind the amount you need for immediate use, as ground coffee quickly loses its flavour and aroma. • With the Sunbeam AutoGrinder coffee beans can be ground from a range of coarse to a very fine grind. The required coffee grind will be determined by the brewing method used or style of coffee desired. The different brewing methods include; BREWING METHOD GRIND Espresso Machines Fine grind Stove top Espresso Medium grind Drip Filtered Medium grind Plunger or Percolator Coarse grind • Do not leave coffee beans or grounds in the open air, for best flavour always store them in an airtight container. • Excess coffee beans or grounds can be stored in the refrigerator or freezer as by doing so will slow down the rate at which the coffee reacts with the moisture in the air. • When grinding more than 12 scoops of coffee beans, pour beans into cover, then turn the grinder upside down and lock onto the cover. Be sure to align the arrow on the lid/cover with the ‘unlock’ graphic on the rear of the grinder and turn the cover to the left/lock position. Using your Sunbeam AutoGrinder Before using your Sunbeam AutoGrinder, wipe the stainless steel grinding bowl and blades clean with a damp cloth and wash the transparent cover in warm soapy water. Dry thoroughly. Note: Allow to dry completely before using. 1.Place the AutoGrinder on a dry, level surface. 2.Remove the cover of the AutoGrinder by turning it to the right/unlock position, then lift straight up. == 3.Using the measurements on the cover/lid, fill with the desired amount of coffee beans and pour into the grinding bowl. Alternatively scoop the beans directly into grinding bowl. 4.Replace and lock the cover onto the AutoGrinder. Align the arrow on the lid/cover with the ‘unlock’ graphic, on the rear of the grinder, and turn the cover to the left/lock position. 5.Hold the plug and pull slowly to release the stored cord. Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’. 6.Select the style of coffee (Percolator, Auto Drip, Espresso) and slide the grind selector to the quantity of ground coffee desired. 4 8 COARSE/ 12 15 PERCOLATOR 4 8 MEDIUM/ 12 15 DRIP 4 8 FINE/ 12 15 ESPRESSO 7.Press the ‘Power’ button to commence grinding and then remove finger. The Sunbeam AutoGrinder will stop automatically when the selected grind is achieved. To stop the grind cycle at anytime, push the ‘Power’ button. When the ‘Power’ button is pressed again, the grinder will start from the beginning of the timed cycle. Important: Do not remove the cover before the blades have stopped moving. 8.Once the blades have stopped rotating unplug the cord from the power outlet and remove the cover. Gently tap the base of the AutoGrinder to loosen the freshly ground coffee from the stainless steel grinding bowl. Note: The AutoGrinder will only operate when the cover is in the locked position. == Care and Cleaning Do not immerse the motor base of the AutoGrinder in water. Do not place the AutoGrinder in the dishwasher. 1.When you have finished grinding, unplug your Autogrinder from the power outlet. 2.Use the soft cleaning brush to clean around the blades. Carefully wipe the grinding bowl with a soft, damp cloth. Important: Use care around sharp blades. 4.Hold the AutoGrinder and turn the base in a clockwise direction to retract the power cord. 3.Wash the cover in warm soapy water. Rinse and dry thoroughly. Wipe the exterior of the 5.The storage container and brush should be AutoGrinder with a damp cloth. washed in hot, soapy water. Rinse and let dry. ‘Sunbeam’, is a registered trademark. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam‘s 12 Month Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2003. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. For more information or advice on this or any other Sunbeam appliance, visit or contact the Sunbeam Consumer Service Line. Australia 1800 025 059 New Zealand (09) 912 0747. Consumer Hotline Australia 1800 025 05...