Votos - 6, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Carefully lift and remove the drawer, empty and • Special Cleaning Tablets (model# 62205) thoroughly rinse all parts and replace. The display shows • Decalcifying Tablets (white, square) model# 61848 HEATING and then PRESS RINSE. Please note: You must use decalcifying tablets if you do not use 13. Push the Rinse Button. The machine will run a regular rinse the Clearyl cartridge. 22. All supplies are available through: until the blocked coffee is pushed into the used coffee container. • The enclosed mail order form that came with your machine B. THE DISPLAY READS "FILL WATER" BUT THERE IS • Our toll free line at 1-800-220-5701 or ENOUGH WATER IN THE WATER TANK. • The Internet at Reason: The low water floatation device (Fig. 7.4) is missing. Solution: Within the water tank is a small compartment (like a 23. FROTHXPRESS SYSTEM mouse trap). Inside is a small black floatation device. On top is a This system and the Cappuccino Cleaner Liquid are included small clear see-through plastic cover. This small plastic cover is with the F8 (sold separately for the F7). If you prepare many missing and the floatation device is outside of the small comcappuccinos or lattes at a time, this system is faster and easier partment. Check if you can locate both pieces and put it back to use than the Dual Frother. It will automatically fill cup after cup together. If you cannot find them, call 1-800-220-5701. We will with your preferred amount of hot steamed and frothed milk, send the pieces to you FREE OF CHARGE. without wasting any milk. See the separate instructions included in the frothXpress box. C. INSUFFICIENT FROTHED MILK PRODUCTION Reason: Milk is initially not cold enough or your milk is not 24. TROUBLESHOOTING suited for thick frothing. A. NO COFFEE COMES OUT OF THE COFFEE SPOUT Solution: Make sure milk is cold. Use a different type of milk. Reason: Beans in bean container are not properly feeding into Skim milk will produce the thickest and longest lasting froth. the grinder because they are stuck together. Whole milk will produce less thick froth. See chapter 14. Solution: Stir beans before grinding and while grinding turn the Reason: The components of the frother are not assembled grinding selector to the coarsest setting. See chapter 7. properly, or the components are clogged with hardened milk, or Reason : You used ground coffee in the ground coffee funnel. one or more of the components is missing, or the steam nozzle The ground coffee was too fine. is clogged. Solution: Use ground coffee which is ground somewhat coarser. Solution: (See chapter 15) Reason : No water is transported through the system. a. Remove frother. Check that steam comes out of the steam Solution: Remove water container and make sure that the con-nozzle. If not, use a needle and clear blockage from inside necting valve is free of any particles (like a coffee bean etc). steam nozzle. Reason: The ground coffee funnel or the internal brewing chamber b. Clean all other frother parts and assemble properly. is clogged. c. If any parts are missing either call Customer Service at: Solution: Place a cup underneath the coffee spout. Push the 1-800-220-5701 or use the enclosed mail order form to order Rinse button (Fig. 3g). RINSING. Repeat the process if necessary the missing part. 23. D. GRINDER MAKES AN EXTREMELY LOUD NOISE; Any damage in transit is NOT covered by this warranty. NO BEANS ARE GROUND This warranty does not cover: Reason: A stone is blocking the burr grinder. • Any machine NOT distributed by JURA-CAPRESSO within the Solution: Call customer service at: 1-800-220-5701. United States. • Any machine not purchased from an Authorized Dealer. E. THE DRAWER (Fig. 19) DOESN’T PULL OUT OR DISPLAY • Damage caused by accident, abuse, negligence, misuse, SHOWS MALFUNCTION 8 improper operation or failure to follow instructions contained in Solution: Turn off and unplug machine. Wait a minute. Turn this manual. machine on and wait until it stops making any noise. Now try to • Any service or alteration performed by an unauthorized person, pull out the drawer. If this does not work, try the above procedure company or association. again. If this does not work, call customer service. • Damage caused by neglecting and omitting maintenance, cleaning and decalcifying cycles. 25. LIMITED WARRANTY • Damage caused by use of instant coffee or any other ingredients Please note: This warranty will be void if the Warranty / Product not allowed in this product. Registration has not been received two weeks after the purchase date (you can fax or mail the registration or you can register Other limitations and exclusions: through our website Any implied warranties including fitness for use and mechantability are limited in duration to the period of the express warranty set This limited warranty covers your new IMPRESSA F Series for forth above and no person is authorized to assume for JURA- household use only (commercial use voids warra...
Otros modelos de este manual:Molinillo de café - IMPRESSA F8 (467.11 kb)