Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Keep this guide handy for future reference. First Use Safety Recommendation English Page 02 Farsi Page 13 Arabic Page 19 English -3- Parts Identification 1 Lid 2 Bowl 3 Grind size indicator 4 Cup quantity selector 5 Start / Stop button 6 Motor Housing 7 Container Lid 8 Coffee Container 9 Cord Storage 10 Main Switch 11 Safety Interlock 1 2 3 4 5 6 9 10 7 11 8 MAX MAX English -4- Intended Use Your Black and Decker Coffee Bean Mill has been designed for grinding coffee beans. Do not use this appliance for any other purpose. This appliance is intended for indoor consumer use only. Safety Instructions Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. • Read all of this manual carefully before using the appliance. • The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury. • Retain this manual for future reference. • Always route the cord carefully to avoid a tripping hazard. • Never operate an appliance directly below the socket-outlet it is connected to. Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Grinding Beans 1. Remove the lid (1) from the bowl (2) and add the required amount of coffee beans. Do not exceed the maximum capacity (marked with a line on the side of the bowl). 2. Refit the lid (1) 3. Ensure the container lid (7) is fitted securely onto the coffee container (8). 4. Place the bowl into position on the motor housing (6) and rotate clockwise until you hear a ratcheting sound. 5. Select the correct grind setting. As a guide use a fine setting for espresso, a medium setting for cafetierres and filter machines and a coarse setting for percolators. Turn the bowl (2) clockwise to select a finer setting and anti clockwise for a coarser setting. The setting indicator on the housing (6) should align with the desired grind setting marked on the bowl (2). 6. Plug the mains cable into a suitable power supply and switch on the main switch (10). 7. Turn the cups quantity selector (4) to select the grinding time and then press the start / stop button (5) to begin grinding. English -5- Important: The appliance is fitted with safety interlocks which prevent the unit operating if the bowl (2) is not screwed far enough down. After grinding is complete the powder cup can be removed from the unit and taken to the coffee making machine. Hints • Empty the powder cup before it becomes full. • During grinding it may be necessary to shake the unit slightly from side to side to free any coffee which is not moving towards the grinding plates. Maximum Operating Time: 3 minutes. Always allow 30 minutes rest before using the unit again. Warning Do not apply pressure to the lid (1) or to the bowl (2). Care and Cleaning • Always switch off and unplug before cleaning. • Do not immerse the appliance, cord set or plug in water or other liquids. • Always clean the unit after each use. • Always ensure the area around the safety interlock (11)is free of coffee. • No parts of the appliance are suitable for cleaning in a Dishwasher. Coffee container and lid (8) and (7) • Wash by hand and dry thoroughly. Bowl (2) • Remove the bowl (2) by turning anticlockwise. • Wash by Hand and dry thoroughly. Motor Housing(6) Clean with damp cloth and dry thoroughly. Safety of others • Do not allow children or any person unfamiliar with these instructions to use the appliance. • Do not allow children or animals to come near the work area or to touch the appliance or power supply cord. Close supervision is necessary when the appliance is used near children. • Never leave an appliance unattended when in use • Do not allow the cord set to hang over bench tops. When using an extension cord with your appliance, make sure the extension cord is correctly wired & rated for its use. • This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance by a person responsible for their safety. English -6- • Children must be supervised to ensure that they do not play with the appliance. After use • Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance. • When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances. Inspection and repairs • B...