Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
You can change/stop the water quantity during the draw-off operation, too. Turn the Rotary Switch (1) until the required ML value is displayed. You can adjust the water quantity in steps of 5 ML using the Rotary Switch (1). READY Turn the Rotary Switch (1) until the required water quantity is displayed. For example, 120 ML 8. Drawing off 1 cup of coffee You have the possibility of increasing the strength of the coffee at any time in the grinding process by pressing the three 1-cup draw-off key again For Example: by pressing the 1-cup draw-off key times you get strong coffee. STRONG You can choose among three strengths at the push of a but- ton. The longer you press the draw-off key for 1 cup (5), the stronger your coffee will be (Display: MILD/ NORMAL/ STRONG). You can adjust the water quantity before the draw-off opera- tion using the Rotary Switch (1). You can stop the draw-off operation at any time by pressing any coffee draw-off key. You can check the water quantity used for the last draw-off operation by pressing the Rotary Switch (1). READY Put a cup under the adjustable coffee spout (17). Press the draw-off key for 1 cup strength is displayed: MILD (5) until the required 180 ML (water quantity last adjusted) The illuminated ring (2) is active. Turn the Rotary Switch (1) again to select the water quantity individually: For Example: 160 ML For Example: MILD Your product is being prepared. READY 9. Drawing off 2 cups of coffee Selecting the coffee strength is not possible when drawing off 2 cups of coffee. You will draw off 2 mild cups automatically. You can adjust the water quantity before the draw-off operation using the Rotary Switch (1). The adjusted value (ML) refers to 1 cup. You can stop the draw-off operation at any time by pressing any coffee draw-off key. You can check the water quantity used for the last draw-off operation by pressing the Rotary Switch (1). READY Put 2 cups under the adjustable coffee spout (17). (6). Press the draw-off key for 2 cups 2 CUPS 120 ML (water quantity last adjusted) The illuminated ring (2) is active. Turn the Rotary Switch (1) again to select the water quantity individually: For Example: 210 ML 2 CUPS Your product is being prepared. READY 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank. Make sure that the pre-ground you use is not too fine. This may cause blocking of the system. In this case the coffee only drips out of the coffee spout. If you have filled in too little powder, the message ADD MORE POWDER will be displayed. The IMPRESSA stops the operation and returns to "ready for draw off" mode. You can stop the draw-off operation at any time by pressing any coffee draw-off key. READY Put 1 or 2 cups under the adjustable coffee spout (17). Open the cover of the filler funnel for pre-ground coffee (11). FILL POWDER Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler funnel for pre-ground coffee (11) (Fig. 11) and close the cover. POWDER SELECT CUP BUTTON Press the required draw-off key for 1 cup (5) or 2 cups (6) 120 ML (water quantity last adjusted) The illuminated ring (2) is active. POWDER Turn the Rotary Switch (1) again to select the water quantity individually: 11 E For Example: 210 ML POWDER Your product is being prepared. READY 11. Drawing off hot water If you do not change the settings using the Rotary Switch (1), the water quantity last adjusted will be drawn off automatically. Install the hot water nozzle (see Fig. 5 ) to obtain perfect water flow. Do not replace the replaceable hot water nozzle (16) directly after drawing off water, because the nozzle is hot after the draw-off operation. At the start of the water draw-off operation there can be splashing Avoid direct contact with the skin! READY Place a cup under the replaceable hot water nozzle (16). Open the steam / hot water draw-off tap (14) (Fig. 13). The illuminated ring (2) is active. For example, 140 ML WATER Adjust the required water quantity by turning the Rotary Switch (1). For example, 200 ML WATER If the required water quantity is reached, the following message is displayed: CLOSE TAP Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP water may still escape the system. 12. Drawing off steam The steam function is used for the preparation of milk foam as well as for the Easy-Auto-Cappuccino Frother (15) cleaning programme. With the optionally available 2-stage frothing nozzle, liquids can be heated and frothed using the steam function. Make sure that the nozzle is correctly fitted when drawing steam. If the nozzle becomes blocked with particles of milk residue or is incorrectly assembled, a danger can arise during use whereby the nozzle may jump off. Due to the system design, some water will escape at firs...
Otros modelos de este manual:Cafeteras - F50 (469.13 kb)
Cafeteras - IMPRESSA F505 (469.13 kb)