Votos - 3, Puntuación media: 4 ( )

Fabricar: Jura Capresso Tamaño del archivo: 459.87 kb Nombre del archivo: Idioma del manual:

The symbols go off. The water hardness only need to be set before the first use of the machine or if a different water quality is used. If you do not carry out a change of level for longer than 30 seconds, the display goes off. The last figure you have stored remains valid. 3.7 Adjustable automatic switch-off You can amend the automatic switch-off time of 1 1/2 hours set by Jura. The machine offers you three levels for this: 1st level The symbol lights up. The automatic switch-off is not activated. 2nd level The , , symbols light up. The automatic switch-off is set to 1 1/2 hours. 3rd level The , , , , , symbols light up. The automatic switch-off is set to 3 1/2 hours. In order to set or alter the automatic switch-off time, please proceed as follows: Connect the plug with the mains. However, do not switch the machine on. Please the draw-off key for about 3 seconds. The , , symbols light up. Select the required level with the draw-off key. Press the ON/OFF switch in order to save the required level. If you do not carry out a change of level for longer than 30 seconds, the display goes off. The last figure you have stored remains valid. 4. First start of operation 4.1 Fill system with water Switch your machine on with the ON/OFF switch. The symbol lights up. Place an empty cup under the pivoting nozzle for hot water/ steam (13). Switch the selector switch for hot water/steam (12) to the position. The machine now lets off water and the symbol flashes at the same time. If the symbol lights up on the display, turn the selector switch for hot water/steam (12) back to the position. E 9 5. Rinsing the machine When the symbol lights up, a rinsing process is demanded. Place an empty cup under the coffee-spout. Press the rinsing maintenance key (4). The rinsing process is automatically ended. If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched on. A rinsing is automatically started when the machine is switched off. 6. Adjusting the water quantity The water quantity can be infinitely adjusted with rotary knob (1). The small key means little water for espresso, the large cup means a lot of water for coffee. You can also change the water volume while coffee is being drawn off. Simply turn the rotary knob (1) to give more or less water. With draw-off key , the machine automatically doubles the water quantity and distributes it to 2 cups. 7. Drawing off espresso/normal coffee As soon as the symbol lights up, you can draw off coffee. Place 1 or 2 cups, as necessary, under coffee-spout (9) and press the required draw-off key. The pre-brew system (I.P.B.A.S.©) moistens the coffee powder, briefly interrupts the flow and then starts the actual brewing process. You can interrupt the draw-off prematurely by pressing any of the coffee draw-off keys. In order to obtain outstanding froth, you can adapt the coffee-spout (5) individually to the size of your cups (Fig. 3). 7.1 Drawing off espresso/strong coffee Place 1 cup under the coffee-spout (9). Press the draw-off symbol until two dots light up to the left of the symbol. This draw-off of espresso / strong coffee is only possible for 1 cup. 7.2 Drawing off espresso/extra coffee Place 1 cup under the coffee-spout (9) . Press the draw-off symbol until three dots light up to the left of the symbol. This draw-off of espresso / extra coffee is only possible forselector switch. The 1 cup. 7.3 Drawing off powder coffee Press the and symbols light up. Now put 1 or 2 level measuring spoons of pre-ground coffee into the filler funnel for pre-ground coffee (10). Place 1 or 2 cups under the coffee-spout (9) and press the required coffee key. Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container. If the draw-off key is pressed by mistake, the selection can be cancelled by pressing the draw-off key. Your machine rinses. After drawing off powder coffee, we recommend that you regularly clean the filler funnel with a clean bottle-cleaning brush. 8. Drawing off steam The steam can be used for heating liquids and also for frothing milk for cappuccino. Make sure that the frothing aid (14) is pushed upwards when heating liquids. When frothing liquids, push the frothing aid downwards (Fig. 5). Place a cup under the pivoting nozzle for hot water/steam (13). Immerse the frothing aid (14) into the milk to be frothed or the liquid to be heated and turn the selector switch for hot water/steam (12) to the position. Immediately after this, press the maintenance key (4). When you have reached the required quantity of steam, turn the selector switch for hot water/steam (12) back to the position . The , symbols light up. If you would like to draw off a coffee immediately after the steam, please proceed as descr...

Descargar ahora

Introduzca dos números de la imagen: