Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
18h. SETTING THE AUTO-ON TIME You must first set the time (chapter above). You can set the machine to turn on at a specific time. It will turn on at that time, warm up and the display shows PRESS MAINT. Press the Rinse Button and you are ready to brew coffee. • Press the P-Button. • Touch the right arrow until the display shows UNIT ON --:--. • Touch ST@RT. The hour segment starts blinking. • Touch either arrow repeatedly to set the hours. • Touch ST@RT to confirm. The minute segment starts blinking. • Touch either arrow repeatedly to set the minutes. • Touch ST@RT to confirm. Now the Auto Turn On time is set. • Press the P button to return to SELECT PRODUCT. 18i. SETTING THE AUTO SHUT-OFF Your F9 is programmed to turn off 2 hours after last use. Select from 1.2 hour to 9 hour shut-off or no automatic shut-off. • Press the P-Button. • Touch the right arrow, the display shows OFF AFT. 2.0 HRS. • Touch ST@RT. • Touch either arrow repeatedly until desired setting is displayed. • Touch ST@RT to confirm. 20. • Press the P button to return to SELECT PRODUCT. Please note: In order for the machine to turn off automatically it must be in the SELECT PRODUCT mode. If you leave the machine in programming mode (red arrows showing), or in any other mode, the machine will not turn off automatically. 18j. SETTING LANGUAGE The F9 is set to ENGLISH. You can change the display to German, French, Italian, Spanish, Portuguese or Dutch. • Press the P-Button. • Touch the right arrow until the display shows LANGUAGE ENGLISH. • Touch ST@RT. • Touch either arrow repeatedly to select the desired language. • Touch ST@RT to confirm. • Press the P button to return to SELECT PRODUCT. 18k. CUP COUNTER The cup counter shows the total number of coffees made. • Press the P-Button. • Touch the right arrow until the display shows SUPPLIED.... It will show the total number of coffees brewed. • Touch any of the cup symbols or coffee buttons and the display shows how often this selection has been used. • Press the P button to return to SELECT PRODUCT. 19. CARE AND MAINTENANCE 19a. FILL WATER When the display shows FILL WATER, no more coffee can be made until you fill the water container. The water container will never be completely empty. The low water floatation device (Fig. 8.4) activates the FILL WATER indicator when there are about 10 oz. of water left. • Remove water tank, rinse and fill with fresh water and replace. 19b. EMPTY TRAY / EMPTY GROUNDS Used coffee grounds are collected in the used coffee container (Fig. 2.19). If the display shows EMPTY GROUNDS or EMPTY TRAY, no more coffee can be made until you empty the used coffee container. • Carefully lift and remove drawer since there is water in it (Fig. 21). The display shows TRAY MISSING. Important: Do NOT unplug the machine while you are emptying the coffee grounds. • Empty the used coffee container and the drawer. • Push the drawer back into the machine (Fig. 22). The display still shows TRAY MISSING. • Place the used coffee container on the tray and insert back into the machine (Fig. 23). The display shows SELECT PRODUCT and you may now continue brewing coffee. 19c. FILL BEANS When the display shows FILL BEANS, open the bean container lid and add beans (Fig. 6). Please note: The message FILL BEANS will disappear after making the next cup of coffee. Attention: If the display shows FILL BEANS and there are ample beans in the bean container, stir the beans so they flow into the grinder (chapter 8). We recommend cleaning the bean container from time to time with a dry cloth before you refill beans (please make sure the machine is turned off when cleaning.) 21. 19d. STONES AND BEANS Every coffee specialty store will tell you that occasionally stones can be found in with coffee beans. Small stones will be processed through the burr grinder without any harm (the stone will end up in the used coffee container). However larger stones can block the burr grinder. The noise of the grinder will become very loud and the grinder will block. Before Filling Beans into the Bean Container: • Shake your bean bag thoroughly so that a stone will fall to the bottom of the bag. • Before emptying the bean bag completely, check if there are any particles that look like stones and remove them. 19e. GENERAL CLEANING INSTRUCTIONS Never use abrasive materials or chemicals to clean the machine. • Clean the housing with a soft, damp cloth. • Rinse water tank daily and fill with fresh, cold water. 19f. EMPTYING SYSTEM BEFORE TRANSPORT This procedure is necessary to prevent water and frost damage in case you intend to transport your Impressa F9. • Turn machine off. • Place a cup underneath the frother. • Push and hold the Steam Button until the display shows: SYSTEM EMPTYING. The machine will push a bit of water and steam into the cup underneath the frother. After about 30 seconds it will turn off automatically. Important: The next time you turn the machine on you must follow the instructions in chapter 6. Please not...