Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 8.06 mb Nombre del archivo: Idioma del manual:

• The icon indicates that the tank must be rinsed and filled. Rinse the water tank thoroughly and refill it with fresh drinking water. • Empty the container used to collect the liquid dispensed by the machine and place it under the steam wand. • When inserting the tank filled with water in the machine, the icon on the side is displayed; turn the selector dial clockwise to position “ ”. • The machine starts the rinse cycle. • When the water in the tank is finished dispensing, the icon on the side is displayed to indicate that the selector dial must be brought back to the “ ” position. • The icon indicates that the tank must be rinsed and filled. Rinse the water tank thoroughly and refill it with fresh drinking water. • Empty the container used to collect the liquid dispensed by the machine and place it under the steam wand. Red Red • When inserting the water tank in the machine , turn the selec tor switch clockwise to position “ ”. Dispense the entire tank as previously described. At the end, fill the tank again. • When inserting the water tank again, the icon on the side is displayed. Press the “ “ button to exit the descaling cycle. • The machine now carries out the warm-up and rinse cycle to prepare for product brewing. • Empty the container used to collect the liquid dispensed by the machine. The descaling solution must be disposed of according to the manufacturer ’s instructions and/or regulations in force in the country of use. After completing the descal ing c ycle, w ash the brew group as described in the “Brew group” section in the “Cleaning and maintenance” section. Reassemble the external part of the Pannarello. English • 41 • Black Orange Black Orange PROGRAMMING The user can change some of the machine operating parameters to suit his/ her needs. Enter the “menu” The programming menu can only be accessed when the machine is in “stand-by” mode. To change the machine status to stand-by mode, press the ON/OFF button. When the machine is in stand-by mode, press the “ “button to access pro gramming. The first page that is displayed is shown here. Programming commands Changes can be made on each page: Orange Orange - The “ ” and “ “ buttons allow you to change the value of the function, among those appearing on the page. - The “ “ button allows you to scroll the functions and to store the changes that were made. Note: Changes can be stored only after the displayed value is changed; when the displaye d value is changed the “OK” message appears. -The “ON/OFF” button allows you to exit the change or programming mode. Exit programming mode To exit the programming mode, press the ON/OFF button until the stand-by page is displayed. Note: The machine will exit the programming mode if the user does not do anything for 30 seconds. The settings that were changed but not confirmed will not be stored. Black • 42 • Orange Orange Orange Orange Orange Orange Orange Orange Orange Functions COFFEE TEMPERATURE This function allows you to adjust the coffee brewing temperature. TIMER (STAND-BY) This function allows you to adjust the time the machine will go into stand-by mode after the last brewing. CONTRAST This function allows you to adjust the contrast of the display to better view the messages. WATER HARDNESS This function allows you to adjust the water hardness in order to better manage machine maintenance: = very soft water = soft water = hard water = very hard water For more details, see the "Water hardness measure ment" section. “INTENZA” WATER FILTER This function allows you to manage the “Intenza” water filter. For more details, see the section related to filter handling. FACTORY SETTINGS This function allows you to reset all factory values. Black Orange Orange Orange Orange Black Programming example In this example, we want to explain how to programme the display contrast. Proceed in a similar manner to change the other functions. Change the machine status to stand-by mode. When the machine is in stand-by mode, press the “ “button to access pro gramming. The first page is displayed. Press the “ “ button until the “CONTRAST” function is displayed. Press the “ ” button 1 (one) time to increase the contrast. Press the “ “ button to confirm. Press the “ON/OFF” button to exit the pro gramming mode. At this point, the function is programmed and will be active the next time the machine is started. English • 43 • CONTROL PANEL DISPLAY Ready Signals Warning Signals Green Green Green Green Green Green Green Green Green • The machine is ready for whole bean coffee brewing and hot water dispensing. • The machine is ready for pre-ground coffee brewing. • The machine is in the steam dispensing phase. • The machine is in the hot water dispensing phase. • The machine is brewing 1 espresso coffee. • The machine is brewing 1 long coffee. • The machine is brewing 2 espresso coffees. • The machine is brewing 2 long coffees. • The machine is programming the amount of coffee to be brewed. Orange Orange Orange Orange Orange • The mac...

Descargar ahora

Introduzca dos números de la imagen: