Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Flexible Clocking, Voltage and Reset Supply Voltage 9 – 12V System MICROCONTROLLERSStarter Kit and Development System ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel®, AVR® and AVR Studio® are registered trademarks of Atmel. Other terms and product names may be the trademarks of others. 1939C-AVR-09/02/15M Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 USA TEL: (1)(408) 441-0311 FAX: (1)(408) 487-2600 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL: (41) 26-426-5555 FAX: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong TEL: (852) 2721-9778 FAX: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL: (81) 3-3523-3551 FAX: (81) 3-3523-7581 e-mail literature@atmel.com Web Site ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel®, AVR® and AVR Studio® are registered trademarks of Atmel. Other terms and product names may be the trademarks of others. 1939C-AVR-09/02/15M Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 USA TEL: (1)(408) 441-0311 FAX: (1)(408) 487-2600 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL: (41) 26-426-5555 FAX: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong TEL: (852) 2721-9778 FAX: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL: (81) 3-3523-3551 FAX: (81) 3-3523-7581 e-mail literature@atmel.com Web Site S T A R TER K IT AND D EVELOPMENT S YSTEMSTK500 The STK500 is a complete starter kit, programming tool and development system for Atmel’s AVR microcontrollers. The STK500 gives AVR users the freedom to develop and test complete AVR designs and prototypes. The STK500 supports all Programming modes of all AVR microcontrollers in the sockets as well as ISP Programming of external target systems. The AVR I/O ports are accessible on pin headers that can be used for connecting the on-board LEDs and push buttons, or external signals. The extra RS-232 port can be connected to any of the I/O pins. The STK500 Programming interface is integrated in AVR Studio. The Flash, EEPROM, and all Fuse and Lock Bit options can be programmed individually or with the sequential automatic programming option. The AVR clock frequency and supply voltage can also be controlled from AVR Studio. A DOS Programming software is included for efficient batch programming in a production environment. The active simulator or emulator code in AVR Studio can easily be programmed into the STK500 with one click of the mouse. Supported Devices(4) ATtiny11 AT90S2323 ATmega8 ATmega323 ATtiny12 AT90S2333 ATmega8515 ATmega32 ATtiny15 AT90S2343 ATmega8535 ATmega64(1) ATtiny22 AT90S4414 ATmega161 ATmega103(1) ATtiny26 AT90S4433 ATmega162 ATmega128(1) ATtiny28 AT90S4434 ATmega163 AT89951(3) AT90S1200 AT90S8515 ATmega16 AT89952(3) AT90S2313 AT90S8535 ATmega169(2) AT86RF401(3) Notes 1: The device is supported through ISP Programming of external target or through the STK501 expansion module. 2: The device is supported through ISP Programming of external target or through the STK502 expansion module. 3: The device is supported through ISP Programming of external target. 4: Low power versions are also supported. Ordering Information The STK500 is available from Atmel franchised distributors. The ordering code is ATSTK500 The latest version of AVR...