Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
2 1.2 The Front Panel LEDs .............................................................................................................. 2 1.3 Factory Defaults........................................................................................................................ 3 2 Setting Up Your Computer’s IP Address..................................................................................... 4 2.1 Windows 2000/NT/XP ............................................................................................................... 4 2.2 Checking/Updating Your Computer’s IP Address..................................................................... 5 2.3 Testing the Connection to the ZyAIR.........................................................................................5 3 Configuring Your ZyAIR .............................................................................................................. 6 3.1 Accessing Your ZyAIR Via Web Configurator........................................................................... 6 3.2 Internet Connection Wizard ...................................................................................................... 7 3.3 Introducing the Web Configurator .......................................................................................... 16 3.4 Resetting the ZyAIR................................................................................................................. 17 3.5 Test Your Internet Connection................................................................................................. 17 4 Hardware Installation..................................................................................................................18 4.1 Desktop Installation ................................................................................................................ 18 4.2 Wall-mount Installation........................................................................................................... 18 4.3 Attaching Antennas.................................................................................................................. 19 5 Troubleshooting............................................................................................................................ 20 1 ZyAIR B-4000 1 Introducing the ZyAIR The ZyAIR Hot Spot Gateway combines an 802.11b wireless access point, router, 4-port switch and service gateway in one box. An “exclusive printer” connects directly to the ZyAIR, allowing you to easily print subscriber statements. The ZyAIR is ideal for offices, coffee shops, libraries, hotels and airport terminals catering to subscribers that seek Internet access. You should have an Internet account already set up and have been given usernames, passwords etc. required for Internet access. 1.1 Rear Panel Connections Figure 1 ZyAIR Rear Panel Table 1 Rear Panel Connections LABEL DESCRIPTION DEVICE PORT Use the printer cable to connect the included printer (“exclusive printer”) to this port. WAN Connect your broadband modem to this port with the Ethernet cable that came with your modem. LAN 1-4 These ports are auto-crossover, (”auto MDI/MDI-X”) which means you can use either a straight-through or crossover Ethernet cable to connect the ZyAIR to a computer or a hub. Power After you’ve made the above connections, connect the ZyAIR’s included power adaptor to the ZyAIR’s power socket. Use only the included power adaptor. The PWR LED turns on. The SYS LED blinks while performing system testing and then turns steady on if the testing is successful. A LAN LED turns on if a LAN port is properly connected. Refer to the following table for more detailed LED descriptions. 1.2 The Front Panel LEDs 2 ZyAIR B-4000 Figure 2 ZyAIR Front Panel Table 2 Front Panel LEDs LED STATUS DESCRIPTION PWR On (Green) The ZyAIR is receiving power. Off The ZyAIR is not receiving power. WAN On (Green) The WAN port has a connection to your cable or DSL modem. Blinking (Green) The WAN port is sending or receiving packets. Off The WAN link is not ready, or has failed. LAN (1-4) On (Green) The port is connected to a 10/100Mbps Ethernet device. Blinking (Green) The port is receiving or sending data. Off The port is not connected to a 10/100Mbps Ethernet device. WIRELESS On (Green) The ZyAIR has established a wireless LAN connection. Blinking (Green) The ZyAIR is sending/receiving data through the wireless LAN. SYS On (Green) The ZyAIR is ready and running. Blinking (Green) The ZyAIR is upgrading its firmware. Off The ZyAIR is not ready or has failed. 1.3 Factory Defaults Table 3 Factory Defaults Username “admin” (case sensitive) WAN IP Address DHCP Client (dynamic WAN IP) Password “1234” LAN IP Address 192.168.1.1 LAN DHCP Server 3 ZyAIR B-4000 2 Setting Up Your Computer’s IP Address Skip this section if your computer is already set up to accept a dynamic IPaddress. This is the default for most new computers. The ZyAIR is already set up to assign y...