Iniciar sesión:
Votos - 2, Puntuación media: 5 ( )

Manual de usuario Lenmar Enterprises, modelo 51188

Fabricar: Lenmar Enterprises
Tamaño del archivo: 1.71 mb
Nombre del archivo: 51188.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Controller 10 If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please try another PCI slot. Once the hardware has installed correctly you can start installing the software from the driver CD. Pin Assignments Parallel 25 Pin female connector pin assignments: Parallel 25 Pin female connector : Pin Signal Pin Signal Pin Signal 1 STROBE 10 ACKNOWLEDGE 19 GROUND 2 DATA 0 11 BUSY 20 GROUND 3 DATA 1 12 PAPER EMPTY 21 GROUND 4 DATA 2 13 SELECT 22 GROUND 5 DATA 3 14 AUTO FEED 23 GROUND 6 DATA 4 15 ERROR 24 GROUND 7 DATA 5 16 INIT 25 GROUND 8 DATA 6 17 SELECT INPUT 26 GROUND 9 DATA 7 18 GROUND Serial 9 Pin male connector pin assignments: Serial 9 Pin male connector : Pin Signal Pin Signal Pin Signal Pin Signal 1 CD 4 DTR 6 DSR 8 CTS 2 RD 5 GROUND 7 RTS 9 RI 3 TD Technical Specifications 2 independent RS-232 serial ports with communication speeds up to 430Kbps Designed to meet PCI-Express Base Specification Revision 1.1 Supports x1,x2,x4,x8,x16..lane..PCI-Express Bus connector keys High speed 16C550 compatible UART controller on-board Supper IEEE 1284 Parallel ports standard On-chip hardware auto flow control to guarantee no data loss Built-in 16 byte hardware FIFO & 256K byte DMA software FIFO Certified by Microsoft WHQL,CE,FCC approval Support DOS, Linux, MAC, Windows 2000/XP/2003 and Vista Ready of the Intel and AMD 32/64-bit CPU System Certifications Certifications FCC Certifications This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN 55024 and EN55022 class A for ITE, EN61000-3-2/-3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable...

Otros modelos de este manual:
Accesorios para el ordenador - 51188 (1.71 mb)
Accesorios para el ordenador - 51188 (1.71 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría