Votos - 3, Puntuación media: 3.3 ( )

Fabricar: AMD Tamaño del archivo: 2.33 mb Nombre del archivo: Idioma del manual:

1.4.24 SNDCN1 17 Mainboard 1.4.25 MINI_PCI1: Mini PCI Slot Mini PCI (Peripheral Component Interconnect) is a 32-bit, 33MHz bus standard for integrated peripherals of smaller products. The mainboard provides one Mini PCI slot available to install expansion cards such as network card, SCSI card, etc. 1 2 1.4.26 CON5: CF Card Connector The mainboard provides one CF card connector (CompactFlash I/II Card). 18 Mainboard Connectors of I/O Board Type 2 --- 1.4.27 J2: 4 Pin Power Conn. Pin Assignment 1 FPGA_TDI 2 FPGA_TMS 3 INITB 4 GND 1.4.28 J4/ J5: PGIO Pin Assignment 1 FPGA_TDI 2 FPGA_TMS 3 INITB 4 GND 1.4.29 USB1: USB These USB ports are used to attach with USB devices, such as keyboard, mouse and other USB supported devices. Pin Assignment Pin Assignment 1 +5V STB 2 +5V STB 3 USB-4 USB5 USB+ 6 USB+ 7 GND 8 GND 9 N/C 10 N/A 1.4.30 USB2001/ USB2002: USB These USB ports are used to attach with USB devices, such as keyboard, mouse and other USB supported devices. Pin Assignment Pin Assignment 1 +5V STB 2 +5V STB 3 USB-4 USB5 USB+ 6 USB+ 7 GND 8 GND 9 N/C 10 N/A 19 Mainboard 1.4.31 COM 1/ 2: COM Port This mainboard provides four COM pin headers for you to connect additional serial connectors on your case back panel. Attach cables of serial connectors onto these headers, then you can use the serial connectors connecting with a mic, modem or other peripheral device. Pin Assignment Pin Assignment 1 DCD 2 SIN 3 SOUT 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 +5V/RINGW/ +12V 10 N/C 1.4.32 CON1001: LVDS Pin Assignment Pin Assignment 2 12V 1 12V 4 GND 3 GND 6 3.3V/5V 5 3.3V/5V 8 GND/I2C_CLK 7 GND/ I2C_DATA 10 BCKLITE_ON 9 BRIGHTNESS 12 LVDS_GND 11 LVDS_GND 14 CHB_TX0+ 13 CHA_TX0+ 16 CHB_TX015 CHA_TX0- 18 LVDS_GND 17 LVDS_GND 20 CHB_TX1+ 19 CHA_TX1+ 22 CHB_TX121 CHA_TX1- 24 LVDS_GND 23 LVDS_GND 26 CHB_TX2+ 25 CHA_TX2+ 28 CHB_TX227 CHA_TX2- 30 LVDS_GND 29 LVDS_GND 32 CHB_TXC+ 31 CHA_TXC+ 34 CHB_TXC- 33 CHA_TXC36 LVDS_GND 35 LVDS_GND 38 CHB_TX3+ 37 CHA_TX3+ 40 CHB_TX339 CHA_TX3- 20 Mainboard 1.4.33 C1001: D-SUB Pin Assignment Pin Assignment 1 N/A 2 N/A 3 N/A 4 N/A 5 HSYNC 6 DDC_CLK 7 VHYNC 8 DDC_DATA 9 VGA_R 10 N/A 11 VGA_G 12 N/A 13 VGA_B 14 N/A 1.4.34 CON2: AUDIO1 - Line In/ Line Out/ Mic In Pin Assignment Pin Assignment 1 LINE1_L 2 LINE1_JD 3 LINE1_R 4 GND 5 GND 6 GND 7 FRONT_L 8 FRONT_JD 9 FRONT_R 10 GND 11 GND 12 GND 13 MIC_L 14 MIC_JD 15 MIC_R 16 GND 1.4.35 CON3: AUDIO2 - SURR/ LFE/ CNE/ SPDIF OUT Pin Assignment Pin Assignment 1 GND 2 GND 3 SURR_L 4 SURR_JD 5 SURR_R 6 GND 7 GND 8 GND 9 LFE 10 LFE_JD 11 CEN 12 GND 13 GND 14 GND 15 VCC5V 16 SPIDF_OUT 21 Mainboard 1.4.36 BIOSCN1: LPC Interface Pin Assignment Pin Assignment 1 LAD0 2 LDRQ 3 LAD1 4 SERIRQ 5 LAD2 6 LPCCLK 7 LAD03 8 LPCRST 9 VCC3P3V 10 LFRAME 11 GND 12 48MHZ 13 VCC5V 14 VCC5V 15 VCC12V 16 VCC12V 1.4.37 KBMS1: Mini-DIN PS/2 Port This mainboard provides a standard Mini-DIN PS/2 port to connect PS/2 keyboard and mouse. Pin Assignment Pin Assignment 1 Keyboard/ 2 N/C Mouse data 3 GND 4 5V 5 Keyboard/ 6 GND Mouse clock 1.4.38 USBLAN1: LAN +USB Port There is one PCI-E Realtek® Giga Ethernet LAN port available for you to attach Internet cables. These USB ports are used to attach with USB devices, such as keyboard, mouse and other USB supported devices. 22 Mainboard 1.4.39 HDMI1001 A HDMI connector is the serial port. 1.4.40 DVI1001 A DVI connector is the serial port. 1.4.41 CON2005: CF Card Connector The mainboard provides one CF card connector (CompactFlash I/II Card). 23 K3780E Mainboard Chapter 2 BIOS Setup 2.1 Main Menu The Award BIOS (Basic Input/Output System) installed in your computer system’s. The BIOS provides for a standard device such as disk drives, serial ports and parallel ports. It also adds password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. The Award BIOS provides a Setup utility program for specifying the system configurations and settings. The BIOS ROM of the system stores the Setup utility. When you turn on the computer, the Award BIOS is immediately activated. Pressing the key immediately allows you to enter the Setup utility. If you a little bit late press the key, POST (Power On Self Test) will continue with its test routines, thus preventing you from invoking the Setup. If you still wish to enter Setup, restart the system by pressing the “Reset” button or simultaneously pressing the , and keys. You can also restart by turning the system Off and back On again. The following message will appear on the screen: Press to Enter Setup In general, you press the arrow keys to highlight items, to select, the and keys to change entries, for help and to quit. When you enter the Setup utility, 24 Mainboard the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. 2.1.1 Standard CMOS Features Include all the adjustable items in standard compatible BIOS. 25 Main...

Descargar ahora

Introduzca dos números de la imagen: