Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Product design, specifications and colours are subject to change without notice and may vary from those shown. Errors and omissions excepted. What you need (b) Installation CD (a) TOSHIBA Multimedia Center (c) USB cable 1 Installing hardware (b) USB port (a) Notebook computer 1. Connect the USB cable to the USB port on your TOSHIBA Multimedia Center. 2. Connect the other end of the USB cable to your computer. USB port(s) can be found on the front, side or back panel of your computer. 2 Installing software Enabling Direct Memory Access and digital CD playback You need to install device drivers and applications before using your TOSHIBA Multimedia Center. 1. After you have installed your hardware, turn on your computer. Windows automatically detects your audio device and searches for device drivers. 2. When the Found New Hardware Wizard dialog box appears, click the Cancel button. 3. Insert the TOSHIBA Multimedia Center Installation CD into your CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not, follow the steps below: i. Start Windows Explorer. ii. On the left pane, click the My Computer icon. iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay. 4. Follow the instructions on the screen to complete the installation. 5. When prompted, restart your computer. 3 For best performance, Direct Memory Access (DMA) needs to be enabled for your storage devices. To enable DMA, follow the instructions below. By default, DMA is already enabled in Windows XP. To listen to audio CDs, digital CD playback must be enabled. To enable digital CD playback follow the instructions below. CD playback volume is controlled by the Wave/MP3 slider in the Surround Mixer application. By default, digital CD playback is already 1. Click Start > Settings > Control Panel or Start > enabled in Windows XP. Control Panel. 2. In the Control Panel dialog box, double-click the System icon. 3. In the System Properties dialog box, click the Hardware tab. 4. Click the Device Manager button. 5. Double-click the IDE ATA/ATAPI IDE Controllers icon. Your IDE channels will appear. 6. Right-click the Primary IDE Channel icon, and then click Properties. 7. In the Properties dialog box, click the Advanced Settings tab. 8. Click the Transfer Mode box, and then click DMA if available. 9. Click the OK button. 10. Right-click the Secondary IDE Channel icon, click Properties, and then repeat steps 7 to 9. 1. Click Start > Settings > Control Panel or Start > Control Panel. 2. In the Control Panel dialog box, double-click the System icon. 3. In the System Properties dialog box, click the Hardware tab. 4. Click the Device Manager button. 5. Double-click the DVD/CD-ROM drives icon. Your computer drives will appear. 6. Right-click the disk drive icon, and then click Properties. 7. Click the Properties tab. 8. In the Digital CD Playback dialog box, click the Enable digital CD audio for this CD-ROM device check box to select it. Click the OK button. To play CDs with external CD-ROM/ DVD-ROM drives, the analog audio out on your external drive needs to be connected to the Line In jack on your TOSHIBA Multimedia Center. TOSHIBA Multimedia Center User's Guide The TOSHIBA Multimedia Center User's Guide is full of useful information, tips and instructions. Go to Start > Programs or All Programs > TOSHIBA > TOSHIBA Multimedia Center > Documentation > Online Manual. More Information Connecting Analog Speakers (e) Rear (Audio Input) jack (b) 2 channel audio cable (d) Front (Audio Input) jack (c) 4 channel audio cable (a) Front Out jack (b) Front Out jack (a) Rear Out jack 2.1 Speakers 4.1 Speakers 5.1 Speakers (i) Green (i) Green (ii) Black (ii) Black (i) Green (i) Green (iii) Orange (ii) Black (iii) Orange (ii) Black front rear center/ subwoofer audio center inputs speaker front speakers rear speakers din (c) Front Out jack (b) Rear Out jack (a) Center/Subwoofer Out jack (d) 5 channel audio cable (f ) Rear (Audio Input) jack (e) Center/ Subwoofer (Audio Input) jack (g) Front (Audio Input) jack Optional Connections (b) Microphone (a) Headphones (e) Electric guitar (d) Pre-amp FX box (c) CD player (f ) Digital Audio Tape recorder (h) 5.1 Speakers (g) MiniDisc recorder audio inputs speakers din audio (i) Green inputs audio inputs front speakers rear speakers rear front din rear audio inputs front (i) Green front rear center/ subwoofer audio inputs FR For best performance, Direct Memory Access (DMA) needs to be enabled for your storage devices. To enable DMA, follow the instructions below. By default, DMA is already enabled in Windows XP. 1. Click Start > Settings > Control Panel or Start > Control Panel. 2. In the Control Panel dialog box, double-click the System icon. 3. In the System Properties dialog box, click the Hardware tab. 4. Click the Device Manager button. 5. Double-click the IDE ATA/ATAPI IDE Controllers icon. Your IDE channels will appear. 6. Right-click the Primary IDE Channel icon, and then click Properties. 7. In the Proper...