Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
from an air conditioned environment to high temperature and humidity outside. In such cases there could be condensing moisture inside the Modem which can cause internal damage. Unplug the Modem and leave it for 30 minutes before use. . Take the Modem carefully. Don’t drop, bend, knock or harshly treat it to avoid destructive damage. . Do not attempt to disassemble the Modem by yourself. Changes and modifications made to the Modem without the approval of manufacturer could void your authority to operate this Modem. In Aircraft . Please power off the Modem before the airplane takes off. In order to protect airplane’s communication system from interference, it is never allowed to use the Modem when it is in flight. Using it before the airplane taking off should get aircrew’s permission according to safety regulations. 1.3 Cleaning and Maintenance . The Modem is non-waterproof, please keep it dry and store in shady and cool place. 7 . Do not use or store the device in dusty or dirty areas, since its moving parts and electronic components can be damaged in such environment. . If you want to clean your Modem, please use clean fabric that is a bit wet or anti-static. Do not use harsh chemical cleaning solvents or strong detergents to clean your Modem, such as alcohol, dilution agent and benzene. Power-off your Modem before you clean it. 1.4 Limited Warranty The warranty does not apply to defects or errors in the product caused by: (a) Reasonable abrasion. (b) Misuse including mishandling, physical damage, improper installation, unauthorized disassembly of the product. (c) Water or any other liquid damage. (d) Any unauthorized repair or modification. (e) Power surges, lightning damage, fire, flood or other events outside ZTE’s reasonable control. (f) Use of the product with any unauthorized third party products such as generic chargers. (g) Any other cause beyond the range of normal usage for products. End User shall have no right to reject, return, or receive a refund for any product from ZTE under the above-mentioned situations. This warranty is end user’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the im8 plied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. 1.5 Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using this product, whether or not ZTE had been advised, knew or should have known the possibility of such damages. 1.6 Functions Functions: Data service, Connection management, etc. 1.7 Specification Mode of Access WiMAX (Worldwide Interoperability for Microwave Access) WiMAX Protocol 802.16e (IEEE 802.16-2005) Frequency Allocation 2300-2400MHz,...