Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Blue blinking WPS is active. LED light off Wi-Fi is off or your device is in sleep mode. Red solid/ blinking The battery is low. Please charge the battery. Battery Green blinking The battery is being charged. Green solid The battery level is middle or high. LED light off Your device is in standby mode and not being charged, or the battery is not inserted. Installing Your Device 4. Insert the microSDHC card if necessary. Connecting to Your Device 4. Input the password, and then click Connect. LEGAL INFORMATION Getting to Know Your Device 1. Slide the back cover and remove it Via Wi-Fi Copyright © 2014 ZTE CORPORATION. Appearance Follow the following steps and figures for PC to connect to your device. All rights reserved. The following figure is only for your reference. The actual product may be 1. Power on your device directly. It will take 1~2 minutes to initialize. different. No part of this publication may be excerpted, reproduced, translated or 2. Use your normal Wi-Fi application on the client to search for the utilized in any form or by any means, electronic or mechanical, including available wireless networks. photocopying and microfilm, without the prior written permission of ZTE NOTE: You may need to input the password for Wi-Fi connection. Please Corporation. ZTE MF65 2. Remove the battery. check the label on your device to get the default. The manual is published by ZTE Corporation. We reserve the right to 5. Wait a moment, and then the client will connect to your device suc5. Insert the battery. Let’s go cessfully. notice. make modifications on print errors or update specifications without prior Getting started with your device. 1. LED Indicators 2. Power Button Connection Scenario 3. WPS Button 4. Micro USB Port Your device allows to use your (U)SIM card to access the Internet and NOTE: Please set the client to obtain an IP address automatically refer 5. (U)SIM Card Slot 6. microSDHC Card Slot Version No. : R1.0 supports multi-clients for surfing on the Internet at the same time. The 3. Insert the (U)SIM card. ring to the chapter “Configuring your PC”, and then the client will get an is a trademark of SD-3C, LLC. IMPORTANT: Edition Time : 2014.01 NOTE: microSDHC logo following figure is only for your reference. IP address like “192.168.0.101”. Your device does not support Micro/Nano or any other nonstandard SIM 3. Select the SSID of your device, and then click Connect. Indicators Indicator Status Description Network Red solid Error status. Not registered to the mobile network, no (U)SIM card inserted or no network service available. Green solid Registered to the mobile network. Green blinking Connected to the mobile network and data is being transferred. cards. To avoid device damage, please do not use them. 6. Close the back cover. NOTE: Do not use the device in an enclosed environment or where heat dissipa- Via USB Cable tion is poor. Prolonged work in such space may cause excessive heat 1. Connect ...