Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
8 3. Select the SSID of your device, and then click Connect. The following picture is only for your reference. 4. Input the password, and then click Connect. NOTE: • There may require the password for Wi-Fi connection, please check the label on your device to get the default. • Double press the WPS button, and then the SSID and Wi-Fi key will display on the OLED screen. 9 5. Wait a moment, and then the client will connect to your device successfully. Via USB Cable 1. Connect to the device. 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the Windows operating system does not launch installation automatically, you can run the installation pro 10 gram in path of My Computer > ZTEMODEM. 4. Wait a moment, and then the client will connect to your device successfully. Accessing the Internet 4G Mode After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic. Mode Operations Automatic Your device will connect to the Internet automatically, and your clients can surf on the Internet directly. Manual Login the webGUI configuration page, and select Settings > Network Settings > Dial-up Settings > Manual, and then click Home > Connect / Disconnect. NOTE: If you want to modify the detailed parameters of your device, please login the webGUI configuration page by visiting or The default password is admin. 11 Internet Wi-Fi Mode 1. Login the webGUI configuration page. 2. Select Settings > Internet Wi-Fi. 3. Set the Internet Wi-Fi Switch and Preferred Network, and then click Apply. NOTE: You need to Enable the Internet Wi-Fi Switch and select Wi-Fi. 4. Connect to the WLAN device. There are two methods for your reference. • Select the listed SSID, and then click Connect. • Click Add, input the WLAN device information in the Add Wi-Fi Hotspot area, and then click Apply. 12 5. After your device connected to the WLAN device successfully, you can access the Internet. Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. 1. Right-click My Network Places, and then select Properties. 2. Right-click Wireless Network Connection, and then select Properties. 13 3. Select Internet Protocol(TCP/IP), and then click Properties. 14 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. 15 Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operati...