Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
This enclosure consists of two major parts – the Component Tray and the Frame. The Component Tray is the main structure holding your motherboard, 5.25” device, HDDs and power adapter/PCB. It can slide in and out of the Frame for component installation. The Mini Skeleton comes with the EP-90 90-watt power adapter, which supplies your computer with sufficient power to operate reliably. Note: The Mini Skeleton comes without any panels or cover. Antec does not recommend that users place any liquid-containing items (drinks, food, sprays, etc.) near it. It is highly recommend that you keep your pets or children away from it. 2 1.1 CASE SPECIFICATIONS Case Type Open-Air Mini-ITX Color Metallic Silver Dimensions 7.5” (H) x 8.3” (W) x 9.1” (D) 190mm (H) x 210mm (W) x 230mm (D) Weight 5.5 lbs / 2.5 kg Cooling 1 x 150mm 3-Speed Blue LED Overhead Fan 1 x 70mm Rear Intake Fan Drive Bays 2 x Quick Release 2.5” Hard Drive Bays 1 x Quick Release 5.25" Bay 2 x Externally Mounted 2.5" Hard Drive Bays Motherboard Size Mini-ITX Front I/O Panel 2 x USB 2.0 Audio In and Out (HDA and AC’97) Power Supply EP-90: 90-watt power adapter and PCB 1.2 DIAGRAM 1. Top 150mm TriCool™ 3-speed blue LED fan 2. Rear 70mm fan 3. 5.25” drive bay 4. Internal 2 x 2.5” HDD bays 5. External 2 x 2.5” HDD mounts 6. Half-height PCI card mount 7. Motherboard mount – Mini-ITX 8. Removable side screens 9. Removable component tray 10. Front I/O panel 11. EP-90 power adapter (not pictured) 3 1.3 EP-90 POWER SUPPLY SPECIFICATIONS The Mini Skeleton-90 is powered by an EP-90 power adapter. Input Characteristics: Rated Voltage Input Voltage Range Frequency Range 100 VAC ~ 240 VAC 90 VAC ~ 264 VAC 50 Hz ~ 60 Hz Output Characteristics: Rated Power Rated Voltage Voltage Range Output Current Ripple & Noise 90W 19V 18.4V ~ 20.0V 0A ~ 4.7A 300 mV The EP-90 is rated at least 85% efficient at 100 VAC and 240 VAC input voltage and maximum load. A variety of industrial-grade safety circuitry will help protect your computer: OVP (Over Voltage Protection), SCP (Short Circuit Protection), and OCP (Over Current Protection). Sometimes the PSU will “latch” into a protected shutdown state. This means that you will need to power off the adapter and clear the fault before it will function again. There are no user-replaceable fuses in the EP-90. 4 HARDWARE INSTALLATION GUIDE This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult your motherboard user’s manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your CPU cooler to find out if there are steps you must take before installing the motherboard. 2.1 REMOVING/REPLACING THE COMPONENT TRAY 1. With the rear of the case facing you, remove the thumbscrew at the left side of the Component Tray. 2. Pull back on the rear of the tray until it stops. 3. To replace the tray, slide the tray back into the chassis from the rear until it locks into place, then replace the thumbscrew on the left side of the Component Tray. 2.2 MOTHERBOARD INSTALLATION Slide out the Component Tray from the Frame as detailed in section 2.1. 1. Line up the motherboard with the standoff holes on the Motherboard Tray. 2. Screw in the motherboard to the standoffs with the provided Phillips-head screws. Replace the Component Tray in the Frame as detailed in section 2.1. Note: You do NOT need to install an I/O panel for the Mini Skeleton. Your motherboard should come with one. Keep it in a safe place. You will need it if you decide to move your motherboard to a traditional case in future. 5 2.3 5.25” DEVICE INSTALLATION 1. In your tool bag, find one of the black screws and attach one to your 5.25” device at the right upper side. 2. While facing the front of the case, insert your 5.25” device into the slot in the Component Tray until it locks into position. Note: It may be necessary to remove the side screens as detailed in section 2.5 to effectively route cables to your device. Pause when the device is halfway inserted, connect the power and data cabling, and then complete installing the device. 2.4 2.5” DEVICE INTERNAL INSTALLATION Your Mini Skeleton case has the ability to mount 2.5” hard drive devices vertically inside the frame for convenient storage capacity. 1. In your tool bag, find one of the black screws and attach one to your 2.5” device at the front screw holes. 2. While facing the front of the case, position the 2.5” device vertically and slide it into one of the 2.5” HDD mounting slots in the Component Tray until it locks into position (make sure the black screw faces up). Note: It may be necessary to remove the side screens as detailed in section 2.5 to effectively route cables to your device. Pause when the device is halfway inserted, connect the power and data cabling, and then complete installing the device. 6 2.5 2.5” DEVICE FRAME-MOUNTED INSTALLATION Your Antec Mini Skeleton case has the ability to mount up to two additional 2.5” devices externally on the Frame fo...