Votos - 5, Puntuación media: 3.4
(
)
)
|
Otros manuales para este modelo:
Tarjetas Madre - P4SDX (2.57 mb)
Tarjetas Madre - P4SDX (3.11 mb)
Tarjetas Madre - P4SDX (1.11 mb)
Tarjetas Madre - P4SDX (3.3 mb)
Resumen del manual
This mark indicates the processor Pin 1 that should match a specific corner of the CPU socket. Incorrect installation of the CPU into the socket may bend the pins and severely damage the CPU! ASUS P4SDX motherboard user guide Notes on Intel® Hyper-Threading Technology 1. This motherboard supports Intel Pentium 4 CPUs with Hyper-Threading Technology. (since PCB R2.00 or later versions) 2. Hyper-Threading Technology is supported under Windows XP and Linux 2.4.x (kernel) and later versions only. Under Linux, use the Hyper-Threading compliler to compile the code. If you are using any other operating systems, disable the Hyper-Threading Techonology item in BIOS to ensure system stability and performance. 3. It is recommended that you install WinXP Service Pack 1. 4. Make sure to enable the Hyper-Threading Technology item in BIOS before installing a supported operating system. 5. For more information on Hyper-Threading Technology, visit info/hyperthreading. 1.8.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90°-100° angle. 3. Position the CPU above the socket such that its marked corner matches the base of the socket lever. To use the Hyper-Threading Technology on this motherboard: 1. Buy an Intel Pentium 4 CPU that supports Hyper-Threading Technology. Install the CPU. 2. Power up the system and enter BIOS Setup (see Chapter 2). Under the Advanced Menu, make sure that the item Hyper-Threading Technology is set to Enabled. The item appears only if you installed a CPU that supports Hyper- Threading Techonology. 3. Reboot the computer. Socket Lever Gold Mark 90°-100° angle Make sure that the socket lever is lifted up to 90°-100° angle, otherwise the CPU does not fit in completely. 4. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damage the CPU! 5. When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. 6. Install a CPU heatsink and fan following the instructions that came with the heatsink package. 7. Connect the CPU fan cable to the CPU fan connector on the motherboard. Chapter 1: Product introduction 1.9 System memory 1.9.1 Overview The motherboard has four (4) Double Data Rate (DDR) DIMM sockets sockets that supports up to 4GB non-ECC PC2700/2100/1600 DDR. P4SDX ® (CHANNEL1) P4SDX 184-Pin DDR DIMM Sockets 80 Pins 104 Pins (CHANNEL0) Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to the motherboard and other system components. DDR DIMM notch Follow these steps to install a DIMM. 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated. 1.9.2 DIMM Qualified Vendor List The following table lists the memory modules that have been tested and qualified for use with this motherboard. Qualified DDR 400 memory modules: Unlocked Retaining Clip Type Vendor Model Size Channel A Max DIMMs supportChannel B SS TwinMOS TMD7608F8E50B 256MB x 2 x 2 DS SS Apacer Apacer ASUS P4SDX motherboard user guide K4H560838D-TCC4 K4H560838D-TCC4 512MB 256MB x 2x 2 x 2 x 21-11 Qualified DDR 400 memory modules: (cont’) Type Vendor Model Size Max DIMMs support Channel A Channel B DS KINGMAX KDL684t4AA-50 256MB x 2 x 2 DS Transcend K4H560838D-TCC4 512MB x 2 x 2 SS Transcend K4H560838D-TCC4 256MB x 2 x 2 SS ADATA K4H560838D-TCC4 256MB x 2 x 2 SS Winbond W942508BH-5 256MB x 2 x 2 SS KINGSTON W942508BH-5 256MB x 2 x 2 SS Winbond W942508BH-5 256MB x 2 x 2 DS Winbond W942508BH-5 512MB x 2 x 2 DS MICRON MT46V16M8-5TESB 256MB x 2 x 2 Qualified DDR 333 memory modules: Vendor Model Size Apacer W9451GBDA-6 256MB Apacer K4H2808380-TCB3 256MB Corsair CMX256A03200C2 256MB Corsair CMX512-3200C2 512MB Corsair CM64Sd512-2700 512MB Hynix HYMD116645B8J-J 128MB Hynix HYMD132645B8J-J 256MB KingMax MPMA82D-68KX3 128MB KingMax MPMB620-68KX3 256MB Kingston KVR333X64C25/256 256MB Micron MT16VDDT3264AG-335B4 256MB Nanya NT512D64S8HA0G-6 512MB Samsung M368L3223DRL-CB3 256MB Samsung MM368L6423CTL-CB3 512MB Twinmos TMD7608F8E60B 256MB Winbond W9425GBDA-6 256MB Winbond W9451GBDA-6 512MB The Nanya NT256D64S8HA0G-6 (NT5DS16M8AT-6) double-sided 256 MB memory module models are not supported by this motherboard. 1.9.3 Memory configurations You may install DDR DIMMs with 64MB, 128MB, 256MB, 512MB, and 1GB densities into the DIMM sockets. For optimum system performance refer to the following DIMM sequences. Chapter 1: Product introduction • Use only the following combinations to install DDR DIMMs. Otherwise, the sys...