Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
OmniView® Serial Console Server Network Configurations (Continued) Network Setting with Web Interface 1. Type in the Console Server’s IP address in the browser’s address field, using this format: (example: The login page will appear. Bookmark the page for easy reference. I I 2. Click on “Network” to open the Network-Configuration page. Quick Installation Guide F1DP116S Network IP Configuration IP Filtering Web Seiver Configuration DDNS RADIUS IP mode: 1 Static □0 IP address: |76.255.43.173 Subnet mask: |255.255.255.248 Default gateway |76.255.43.174 Primary DNS: 68.94.156.1 Secondary DNS (optional): 168.94.157.11 Server name: OmniView Serial Console TCP keep-alive time(sec): |l5 Save & Reboot OmniView Serial Console Server AC Power Cord DB9F-RJ45F Adapter, DTE Part Number: F1D120 DB25F-RJ45F Adapter, DTE Part Number: F1D121 DB25M-RJ45F Adapter, DCE Part Number: F1D122 DB25M-RJ45F Adapter, DTE Part Number: F1D123 RJ45M-RJ45F Adapter, Sun Part Number: F1D124 RJ45 Cable, 6 ft. User Manual CD V Quick Installation Guide Rack-Mount Brackets and Screws Local console port adapter DB9F-RJ45F 3. Assign a static IP and other network settings. Click on “Save & Reboot” to store any network-configuration settings. Note: If the user leaves the web browser idle for more than 30 minutes, the login session will time-out and terminate the session. Congratulations You have completed the installation of your OmniView Serial Console Server. To further configure the functions of your Console Server, please refer to your User Manual. Hardware Installations CAT5 cab □ □ ■ a CAT5 cable (straight) CAT5 cable (straight) RJ45-to-DB9M adapter DB CAT5 cable (straight) Ethernet OR Local console Port port adapter Modem Devices to be controlled 3 Controlling host Order Additional Serial Adapters Contact your sales rep today and ask for these serial adapters. Belkin Part Number Description Application F1D120 F1D120-8PK (8-Pack) DB9F-RJ45F Adapter Bay Accelar, Nortel, or other DB9 DTE serial devices F1D121 DB25F-RJ45F Adapter DTE serial devices with DB25 ports F1D122 DB25M-RJ45F Adapter DCE serial devices with DB25 ports (e.g., modem) F1D123 DB25M-RJ45F Adapter Sun SPARC or other DTE devices with DB25 ports F1D124 F1D124-8PK (8-Pack) RJ45M-RJ45F Adapter Sun/Cisco devices with RJ45 ports Please refer to for the most current list of supported devices. Network Configurations Identify Your IP Address To identify the IP address on your network, use the MAC address located on the back of the Console Server. If no DHCP server is found on your network, the Console Server will boot with the following static IP address: 192.168.2.156. Assigning IP from the Console Port—VT-100 (Console, Telnet, SSH) 1. Connect the console port on the rear panel to a serial port on a PC host using the CAT5 cable and the console port adapter, included with the Belkin Console Server. 2. Configure a terminal emulation program, such as HyperTerminal, using the following parameters: Baud rate = 115200 Data bits = 8 Stop bits = 1 Parity = none Flow control = none Belkin OmniView Serial Console Copyright (c) 2007, All Rights Reserved BELKIN OmniView® Serial Console Server BELKIN. Belkin Tech Support US: 800-223-5546 ext. 2263 310-898-1 100 ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: Belkin International, Inc. 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin Ltd. 4 Pioneer Avenue Tuggerah Business Park Tuggerah, NSW 2259, Australia +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax Network > IP Config 3. Enter IP Config for network settings. © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. P75599...