Votos - 2, Puntuación media: 5 ( )

Fabricar: Fujitsu Tamaño del archivo: 855.98 kb Nombre del archivo: Idioma del manual:

Either of the following is displayed: Unavailable Available Assigned The XSB cannot be used. The XSB may be unrecognizable because it is not mounted, it contains an error, it has been assigned to another domain, or the settings of the domain or system board are not complete. The XSB is registered on the DCL and can be used. The XSB may be located in the system board pool. The XSB is reserved for or assigned to the domain. Power status of the XSB n Power is off. y Power is on. Status of the XSB connection to the domain configuration n The XSB is not connected to the domain, or it is located in the system board pool. y The XSB is connected to the domain. System Administration 301 showboards(8) Conf Incorporation state of XSB hardware resources into the Solaris OS n The resources are not connected to the Solaris OS. y The resources are incorporated in the Solaris OS. Test Status of an initial diagnosis on an XSB Unmount The XSB cannot be recognized because it is not mounted or because it has an error. Unknown Not performed. Testing The initial diagnosis is in progress. Passed The initial diagnosis ended normally. Failed Error (test=fail) detected by an initial diagnosis. The XSB cannot be used or is in a degraded state. Fault XSB degradation status Normal Normal Degraded Component in a degraded state. The XSB can operate. Faulted An error occurred and the XSB cannot operate. When the -v option is specified, the following types of information are displayed as XSB detail status information: R Dynamic reconfiguration(DR) involving the reservation state of the XSB in the domain * DR processing is reserved. When the domain is rebooted, the XSB is incorporated into or disconnected from the domain, and the domain configuration is changed. Cod Whether the XSB is a COD board n The XSB is not a COD board. y The XSB is a COD board. 302 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 showboards(8) Privileges OPTIONS OPERANDS EXAMPLES You must have one of the following privileges to run this command: platadm, platop, fieldeng Can execute the command for all domains. domainadm, domainmgr, domainop Can execute the command only for accessible domains. Refer to setprivileges(8) for more information. The following options are supported: -a Displays the state of XSBs configured in or assigned to a domain and the state of all mounted XSBs. -c sp Displays the system boards located in the system board pool. System boards in the system board pool do not belong to any domain. -d domain_id Specifies the ID of the domain whose status of XSB is displayed. Only information that is defined with the DCL of the specified domain is displayed. An integer ranging from 0 to 23 can be specified for domain_id, depending on the system configuration. -h Displays usage statement. When used with other options or operands, an error occurs. -v Displays detailed information on XSB. The following operand is supported: xsb Specifies the XSB number to be displayed. The following xsb form is accepted: x-y where: x An integer from 0 0-15. y An integer from 0-3. EXAMPLE 1 Displays information on all mounted system boards. xscf> showboards -a XSB DID(LSB) Assignment Pwr Conn Conf Test Fault System Administration 303 showboards(8) 00-0 00(00) Assigned y y y Passed Normal 00-1 00(01) Assigned y y y Passed Normal 00-2 SP Available y n n Passed Normal 00-3 02(00) Unavailable y n n Unknown Normal EXAMPLE 2 Displays detailed information on all mounted system boards. xscf> showboards -v -a XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault CO 00-0 00(00) Assigned y y y Passed Normal n 00-1 * 00(01) Assigned y y y Passed Normal n 00-2 SP Available y n n Passed Normal n 00-3 02(00) Unavailable y n n Unknown Normal n EXAMPLE 3 Displays information on XSB#00-0. xscf> showboards 00-0 XSB DID(LSB) Assignment Pwr Conn Conf Test Fault 00-0 15(00) Assigned y y y Passed Normal EXAMPLE 4 Displays detailed information on XSB#00-0. xscf> showboards -v 00-0 XSB R DID(LSB) Assignment Pwr Conn Conf Test Fault COD 00-0 * 15(00) Assigned y n n Passed Normal y EXAMPLE 5 Displays system boards located in the system board pool. xscf> showboards -a -c sp XSB DID(LSB) Assignment Pwr Conn Conf Test Fault 00-0 SP Available y n n Passed Normal 00-2 SP Available y n n Passed Normal 00-3 SP Available y n n Passed Normal 304 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 showboards(8) EXIT STATUS SEE ALSO EXAMPLE 6 Displays the system boards that are defined for domain ID 0 and located in the system board pool. xscf> showboards -d 0 -c sp XSB DID(LSB) Assignment Pwr Conn Conf Test Fault 00-2 SP Available y n n Passed Normal The following exit values are returned: 0 Successful completion. >0 An error occurred. addboard (8), addcodlicense (8), deleteboard (8), deletecodlicense (8), moveboard (8), setdcl (8), setupfru (8),...

Descargar ahora

Introduzca dos números de la imagen: