Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the front stand. 4. Push the back stand to its maximum extent. 5. Slide the stand cover through the stand and remove the back stand cover from the computer. Related tasks Installing The Back Stand Cover Back to Contents Page Dell Vostro 330 Owner's Manual Installing The Speakers 1. Place the speakers on the system board. 2. Replace the screws that secure the speakers to the system board. 3. Connect the speaker cable to the system board. 4. Replace the system board shield. 5. Replace the front stand. 6. Replace the cover. 7. Follow the procedures in After Working Inside Your Computer. Related tasks Removing the Speakers Back to Contents Page Dell Vostro 330 Owner's Manual Removing The Front Stand 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the screws that secure the front stand to the computer. 4. Fold the back stand as far as it will go and then lift the front stand out of the computer. 5. Remove the screws securing the I/O bracket to the front stand. 6. Remove the I/O panel. Related tasks Installing The Front Stand Back to Contents Page Dell Vostro 330 Owner's Manual System Board Shield Removing The System Board Shield Installing The System Board Shield Back to Contents Page Dell Vostro 330 Owner's Manual Removing The Processor Heat Sink 1. Place the heat sink on the computer and replace the screws that secure the heat sink to the system board. 2. Replace the screws that secure the heat sink to the computer. 3. Replace the processor fan. 4. Replace the video card fan. 5. Replace the video card and heat sink assembly. 6. Replace the system board shield. 7. Replace the front stand. 8. Replace the cover. 9. Follow the procedures in After Working Inside Your Computer. Related tasks Removing the Processor Heat Sink Back to Contents Page Dell Vostro 330 Owner's Manual Installing The Antenna 1. Place the antenna on its location on the chassis and paste it to the chassis using the metal tape. 2. Turn the chassis over. Paste the cables using the metal tape. 3. Replace the screws that secure the antenna to the chassis. 4. Route the cables through the routing slots, and engage the cables to the clips. 5. Replace the front bezel. 6. Replace the middle bezel. 7. Replace the processor. 8. Replace the processor heat sink. 9. Replace the processor fan. 10. Replace the video card fan. 11. Replace the video card and heat sink assembly. 12. Replace the system board shield. 13. Replace the front stand. 14. Replace the cover. 15. Follow the procedures in After Working Inside Your Computer. Related tasks Removing the Antenna Back to Contents Page Dell Vostro 330 Owner's Manual Removing The Web Camera 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the front stand. 4. Remove the system board shield. 5. Remove the WLAN card. 6. Remove the video card fan. 7. Remove the video card and heat sink assembly. 8. Remove the processor fan. 9. Remove the processor heat sink. 10. Remove the processor. 11. Remove the system board. 12. Remove the middle bezel. 13. Remove the front bezel. 14. Locate the camera board. 15. Remove the screws that secure the camera board to the front bezel. 16. Remove the camera board along with the cable. Related tasks Installing The Web Camera Back to Contents Page Dell Vostro 330 Owner's Manual Optical Drive Removing The Optical Drive Installing The Optical Drive Back to Contents Page Dell Vostro 330 Owner's Manual Installing The Convertor Board 1. Place the convertor board on the computer. 2. Replace the screws that secure the convertor board to the computer. 3. Connect the display and power cables to the convertor board. 4. Replace the cover. 5. Follow the procedures in After Working Inside Your Computer. Related tasks Removing the Convertor Board Back to Contents Page Dell Vostro 330 Owner's Manual System Setup Screens Use the following keys to navigate through the System Setup screens: Menu — Appears on top of the System Setup window. This field provides a menu to access the System Setup options. Press < Left Arrow > and < Right Arrow > keys to navigate. As a Menu option is highlighted, the Options List lists the options that define the hardware installed on your computer. Options List — Appears on the left side of the System Setup window. The field lists features that define the configuration of your computer, including installed hardware, power conservation, and security features. Scroll up and down the list with the upand downarrow keys. As an option is highlighted, the Options Field displays the option's current and available settings. Options Field — Appears on the right side of Options List and contains information about each option listed in the Options List . In this field you can view information about your computer and make changes to your current settings. Press < Enter> to make changes to your current sett...