Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Cable Removal 1 2 3 1 Power cable 2 Floppy-drive data cable 3 Floppy-drive connector Replacing the Floppy Drive Small Form-Factor Computer 1 Snap the replacement drive into the sled and ensure that it is secure. Drives | support.dell.com 2 Connect the interposer board to the floppy drive. a Slide the floppy-drive cable into the connector. b Close the lever so that the cable is secure in the connector. c Line up the hole on the bottom of the interposer board with the notch on the connector, and snap the interposer board onto the drive. 3 Gently slide the floppy drive into the computer until the tabs securely click into position. 56 Drives Attaching the Floppy-Drive Data Cable 1 3 4 2 or 2 1 3 4 Drives | support.dell.com 1 Connector notch 2 Interposer board alignment hole 3 Floppy-drive cable 4 Lever 4 Attach the power cable to the interposer board on the floppy drive. 5 Attach the CD/DVD drive cable and the power cable to the CD/DVD drive. 6 Connect the floppy-drive cable to the DSKT connector on the system board. 7 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 8 Close the computer cover, reconnect your computer and devices to their electrical outlets, and turn them on. 9 Enter system setup and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive. 10 Verify that your computer works correctly by running the Dell Diagnostics. Small Desktop Computer 1 If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and tightening all four screws (two screws on each rail). 2 Gently slide the floppy drive into place until the tabs click securely into position. 3 Attach the power and floppy-drive data cables to the floppy drive, and connect the other end of the data cable to the connector on the system board. 58 Drives Cable Replacement 1 2 3 1 Power cable 2 Floppy-drive data cable 3 Floppy-drive connector Small Mini-Tower Computer 1 If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and tightening all four screws (two screws on each rail). 2 Gently slide the floppy drive into place until the tabs click securely into position. 3 Attach the power and floppy-drive data cables to the floppy drive, and connect the other end of the data cable to the connector on the system board. Drives | support.dell.com Cable Replacement 3 1 2 1 Power cable 2 Floppy-drive data cable 3 Floppy-drive connector Removing the CD/DVD Drive Small Form-Factor Computer 1 Remove the interposer board from the CD/DVD drive. 60 Drives Interposer Board Removal or 1 Interposer board 2 Press inward on the two tabs on the sides of the drive to disengage the drive from the computer. 3 Slide the drive upward and remove it from the computer. Drives | support.dell.com CD/DVD Drive Removal Small Desktop Computer 1 Remove the data, power, and audio cables from the drive. 62 Drives Drives 63 Cable Removal 2 Press inward on the two tabs on the sides of the drive bay to disengage the drive from the computer. 3 Slide the drive upward and remove it from the computer. 4 If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. 1 Power cable 2 Audio cable 3 Data cable 4 Drive connector 1 2 3 4 www .del.com | suport.del.com Drive Bracket Rail Removal Small Mini-Tower Computer 1 Remove the data, power, and audio cables from the drive. 64 Drives Drives 65 Cable Removal 2 Press inward on the two tabs on the sides of the drive bay to disengage the drive from the computer. 3 Slide the drive upward and remove it from the computer. 1 Power cable 2 Audio cable 3 Data cable 4 Drive connector 1 2 3 4 www .del.com | suport.del.com CD/DVD Drive Removal 4 If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Drive Bracket Rail Removal 66 Drives Replacing the CD/DVD Drive Small Form-Factor Computer 1 Gently slide the drive into place until the tabs securely click into position. 2 Connect the interposer board to the CD/DVD drive. a Ensure that the interposer board tab fits securely under the notch on the inside of the cover. b Attach the power and audio cables to the interposer board. Drives 68 Drives d e l l . c o m | s u p p o r t . d e l l . c o m Interposer Board Replacement 1 3 2 or 1 3 2 1 Interposer board 2 Notch on inside of cover 3 Interpos...