Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Connecting the USB keyboard or mouse What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 63. Completing the parts replacement After completing the installation or replacement for all parts, you need to reinstall the computer cover and reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated information in the Setup Utility program. Refer to Chapter 7 “Using the Setup Utility program” on page 73. To reinstall the computer cover and reconnect cables to your computer, do the following: 1. Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 13 for the locations of various components in your computer. 2. If you have removed the front bezel, reinstall it. Chapter 5. Installing or replacing hardware 63 3. Reinstall the PCI card holder if you have removed it. See “Removing and reinstalling the PCI card holder” on page 36. 4. Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover. 5. Align the cover with the chassis and then close the cover to engage the cover latch. Figure 46. Reinstalling the computer cover 6. Use the key to lock the keylock on the computer cover. See “Locking the computer cover” on page 28. 7. If there is a padlock available, lock the computer cover. See “Installing a padlock” on page 29. 8. If there is an integrated cable lock available, lock the computer. See “Attaching an integrated cable lock” on page 30. 9. Reconnect the external cables and power cords to the computer. See “Locating connectors on the rear of your computer” on page 11. 10. To update your configuration, refer to Chapter 7 “Using the Setup Utility program” on page 73. Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit (CRU). Information about this will come with the CRU or will come a few days after the CRU arrives. Obtaining device drivers You can obtain device drivers for operating systems that are not preinstalled at Installation instructions are provided in readme files with the device-driver files. 64 ThinkStation User Guide Chapter 6. Recovery information This chapter provides information about the recovery solutions provided by Lenovo. • “Recovery information” on page 65 • “Recovery information for the Windows 8 operating system” on page 71 Recovery information This chapter provides information about the recovery solutions provided by Lenovo. This chapter contains the following topics: • Creating and using recovery media • Performing backup and recovery operations • Using the Rescue and Recovery workspace • Creating and using a rescue medium • Installing or reinstalling device drivers • Solving recovery problems Notes: 1. The recovery information in this chapter only applies to the computers that have the Rescue and Recovery program or the Product Recovery program installed. If the Enhanced Backup and Restore icon in the Lenovo ThinkVantage Tools program is dimmed, it indicates that you need to install the Rescue and Recovery program manually before enabling its features. To install the Rescue and Recovery program, do the following: a. Click Start . All Programs . Lenovo ThinkVantage Tools, and double-click Enhanced Backup and Restore. b. Follow the instructions on the screen. c. When the installation process completes, the Enhanced Backup and Restore icon is activated. 2. There are a variety of methods to choose from when considering how to recover in the event of a software-or hardware-related problem. Some methods vary depending on the type of operating system that is installed. 3. The product on the recovery media may be used only for the following purposes: • Restore the product preinstalled on your computer • Reinstall the product • Modify the product using the Additional Files Creating and using recovery media You can use recovery media to restore the hard disk drive to the factory default state. Recovery media are useful if you transfer the computer to another area, sell the computer, recycle the computer, or put the computer in an operational state after all other methods of recovery have failed. As a precautionary measure, it is important to create recovery media as early as possible. Note: The recovery operations you can perform using recovery media vary depending on the operating system from which the recovery media were created. The recovery media might contain a boot medium and a data medium. Your Microsoft Windows license permits you to create only one data medium, so it is important that you store the recovery media in a safe place after you have made them. © Copyright Lenovo 2013 C...
Otros modelos de este manual:Computadoras - ThinkStation C30 (1096) (15.03 mb)
Computadoras - ThinkStation C30 (1097) (15.03 mb)
Computadoras - ThinkStation C30 (1136) (15.03 mb)
Computadoras - ThinkStation C30 (1137) (15.03 mb)