Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
WHITE PAPER (cont.)
.
.
. The console provides commands you can use to do simple operations such as changing to a
.
.
. different directory or viewing a directory, and more powerful operations such as fixing the boot
.
.
. sector. You can access Help for the commands in the Recovery Console by typing help at the
.
.
. Recovery Console command prompt.
.
.
.
.
. Once you have access to the Windows installation you can try to correct potential problems with
.
.
. the file system by executing the command chkdsk /f /r.
.
.
.
.
.
. NOTE: For more information on how to use the recovery console, including enabling and
.
.
. disabling services, replacing corrupted system files and other operations, please review the
.
.
. Microsoft KnowledgeBase or your online documentation by searching on the keywords:
.
.
. “recovery console”.
.
.
.
.
.
.
.
.
.
. R E P A I R I N G T H E I N S T A L L E D O P E R A T I N G S Y S T E M
.
.
.
.
. If you are unable to repair the software configuration using the methods described above, you can
.
.
. reinstall the Windows operating system on top of the current installation in an attempt to replace
.
.
. damaged or corrupted components.
.
.
.
. The steps to perform repair installation are as follows:
.
.
.
.
.
.
. NOTE: Make sure that the system is configured to boot first from the CD-ROM drive, then from
.
.
. the hard drive. You can verify or change device boot order using the Computer Setup (F10) Utility.
.
. For more information, refer to the Computer Setup (F10) Utility Guide provided with the
.
.
. computer.
.
.
.
.
.
.
.
. 1. Insert the Windows 2000 or Windows XP CD-ROM into the CD-ROM drive.
.
.
.
. 2. Click
Start > Shut Down, then select Restart from the drop-down list.
.
.
.
.
. 3. In
the Shut Down Windows dialog, click OK.
.
.
.
. 4. Press any key to start the computer from the CD-ROM drive when you are prompted to do so.
.
.
.
.
. 5. On
the
Welcome to Setup page, press the Enter key.
.
.
.
. 6. On
the
Setup Windows page, press R to repair the installed copy of the Windows operating
.
.
.
system.
.
.
.
. 7. Follow the installation instructions displayed on the screen to complete the repair process.
.
.
.
.
.
.
. U S I N G T H E R E S T O R E P L U S ! C D
.
.
.
.
. The Restore Plus! CD is used to perform a destructive restore of the PC. This process will restore
.
.
. the PC to a near-factory shipping state with software and drivers provided by HP. The process will
.
.
. format and partition the first bootable hard disk volume in the computer. The Restore Plus! process
.
.
. does not affect data contained on any hard disk volumes other than the first bootable hard disk
.
.
. (usually the IDE hard disk connected as master to the primary IDE controller).
.
.
.
. If you have changed the controller boot order processing within the system BIOS (located by
.
.
. pressing F10 during system boot) to make a SCSI controller the first bootable device, the Restore
.
.
. Plus!
.
process will use the first SCSI hard disk in the SCSI chain for restoration purposes.
.
.
.
. The Restore Plus! CD displays a step-by-step interactive wizard that prompts for all necessary CD
.
.
. media, then automates the installation of the Windows operating system and HP-supplied software
.
.
. components.
.
.
.
PSG#HJ_DT_010303_1A
5
...Otros modelos de este manual:
Computadoras - Compaq iPAQ Legacy-free PC C700/815e (70.99 kb)
Computadoras - Compaq iPAQ Legacy-free PC C800/815e (70.99 kb)
Computadoras - Compaq iPAQ Legacy-free PC P1.0/815e (70.99 kb)
Computadoras - Compaq iPAQ Legacy-free PC P500/810e (70.99 kb)