Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario HP, modelo HP Vectra Pentium Family

Fabricar: HP
Tamaño del archivo: 236.8 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


scsi-ag.bk : scsiadm.fb4 Page 6 Tuesday, September 15, 1998 2:25 PM

Configuring the SCSI Bus
Advanced Configuration It is recommended that these settings are not changed.
Options Menu
Advanced Configuration Options
Plug and Play Scam Support ....................................Disabled
Extended BIOS Translation for DOS Drives > 1 GByte ............ Enabled
Reset SCSI Bus at IC Initialization............................ Enabled
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Host Adapter BIOS (Configuration Utility Reserves BIOS Space).. Enabled
Support Removable Disks Under BIOS as Fixed Disks.............. Boot Only
Display F6 Message During BIOS Initialization.................. Enabled
BIOS Support for Bootable CD-ROM................................Enabled
BIOS Support for Int13 Extensions.............................. Enabled
Use the
and
keys to move between options. Press
to
display a menu with a selection of values.

Plug and Play Scam Support
When enabled, this option automatically configures Plug and Play
compatible SCSI devices. For SCSI devices that do not support Plug
and Play, set this option to Disabled. By default, it is enabled.

Extended BIOS Translation for DOS Drives >1 GByte
This option is no longer used (and must always be “Enabled”).

Reset SCSI Bus at IC Initialization
When the SCSI controller receives an IC Reset command from the
central processor, it can reset either itself and the SCSI bus, or just
itself. By default, it will reset both itself and the SCSI bus.

Host Adapter BIOS
This option enables or disables the SCSI Adapter BIOS. Several
options in SCSISelect utility are only valid if the SCSI adapter BIOS
is enabled. The SCSI adapter BIOS must be enabled if the computer
boots from a SCSI hard disk drive. This option is enabled by default.

Support Removable Disks Under BIOS as Fixed Disks
When Boot Only is selected, only the removable media drive
designated as the boot device is treated as a hard disk drive.
If All Disks is selected, all removable-media drives supported by
the BIOS are treated as hard disk drives. No removable-media drives
are treated as hard disk drives when Disabled is selected. In this
case, removable-media drives must be controlled through operating
system drivers.
6 English


...

Otros modelos de este manual:
Computadoras - HP Vectra VA series (236.8 kb)
Computadoras - HP Vectra VT series (236.8 kb)
Computadoras - HP Vectra XP series (236.8 kb)
Computadoras - HP Vectra XW series (236.8 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría