Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Installing Onboard
HP BladeSystem Onboard
Administrator modules
The HP BladeSystem c7000 Enclosure is shipped with one HP
Administrator Module
BladeSystem Onboard Administrator module installed and can
support up to two Onboard Administrator modules. Install
Installation Instructions
Onboard Administrator modules based on the total number
ordered:
for HP BladeSystem c7000 Enclosures
•
One Onboard Administrator module: Bay 1
•
Two Onboard Administrator modules: Bays 1 and 2
Install an Onboard Administrator blank in an unused Onboard
Administrator bay.
NOTE: When two Onboard Administrator modules are
installed, the module installed in Bay 1 is active and the
module installed in Bay 2 is redundant.
To install an Onboard Administrator module:
1. Remove the Onboard Administrator blank, if present.
a. Press the button on the front of the blank to release the
handle.
b. Pull the handle, and slide the Onboard Administrator
blank out of the Onboard Administrator tray.
2. Slide the Onboard Administrator module into the Onboard
Administrator tray, and close the handle. When the
Onboard Administrator module is fully inserted, it locks into
place.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
March 2006 (First Edition)
Part Number 413967-021
The installation is complete.
...Otros modelos de este manual:
Computadoras - HP ProLiant xw460c Blade Workstation (296.85 kb)