Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Computadoras - HP Integrity rx6600 Server (295.12 kb)
Computadoras - HP Integrity rx6600 Server (578.49 kb)
Computadoras - HP Integrity rx6600 Server (428.77 kb)
Resumen del manual
Console Quick Start
iLO 2 MP LAN
Though there are several methods to configuring the LAN, DHCP with DNS is the preferred one. DHCP with
DNS comes preconfigured with default factory settings, including a default user account and password. By
default, the iLO 2 MP LAN uses DHCP to retrieve a new LAN address for itself if the firmware version on the
iLO 2 MP is E.03.15 or newer. When this occurs, the default hostname is set to “mp
MAC address for the iLO 2 MP LAN is found on the rear of the server. If DDNS (Dynamic DNS) is enabled in
the datacenter, the DNS server automatically registers the new name and enables you to reach the iLO 2 MP
through the Web browser by entering “https://mp
“mp
URL: https://mp00306e22b403/. For information on the iLO 2 MP, see the HP Integrity rx3600 and rx6600
Integrated Light-Out 2 Management Processor Operations Guide at:
http://www.docs.hp.com/en/hw.html and search for your server product number.
Linux and Windows
The Linux® and Windows® operating systems can use the VGA and USB ports for console connection; but
these ports do not connect to the iLO 2 MP. Ensure the proper graphics monitor path is specified in the EFI
Boot Manager Console Configuration menu. If you want to have an ASCII console configured in Linux or
Windows, you can configure it in the EFI Boot Manager Console Configuration menu.
For Linux information on changing the default console and using the EFI Boot Manager Configuration Options,
see Configuring Your Console in Installing Linux on HP Integrity Servers at:
http://www.docs.hp.com/en/linux.html under HP Enablement Kit for Linux on HP Integrity Servers
Installation CD User's Guide.
For Windows information on the default console, see Windows on HP Integrity Servers at:
http://h18004.www1.hp.com/products/servers/software/microsoft/Integrity-index.html; and at:
http://www.docs.hp.com/en/windows.html
HP-UX and Open VMS
The HP-UX and OVMS operating systems use the console connection of the iLO 2 MP as the default console.
However, if the iLO 2 MP console path is not selected in the EFI Boot Manager Console Configuration menu,
HP-UX messages may not be presented to the console device. Also, HP-UX systems typically should only have
the iLO 2 MP console path selected in the EFI Boot Manager Console Configuration menu.
For information on changing the default console and using the EFI Boot Manager Configuration Options, see
Selecting Your HP-UX Console in the HP-UX Installation and Update Guide at: http://www.docs.hp.com/en.
Choose your operating system version in By OS Release and find the guide under Installing and Updating.
Extensible Firmware Interface (EFI)
Prior to installing and booting an operating system, all console interaction is through system firmware.
System firmware communicates to the console connections specified in the EFI Boot Manager Console
Configuration options. These configuration options must match the physical console device connections.
Once an operating system is installed, the default system console output is determined and is also dependent
on the EFI Boot Manager Console Configuration setting. For information on changing the default console and
using the EFI Boot Manager Configuration Options, see the appropriate operating system documentation.
IMPORTANT Failure to properly configure the console device can result in the inability of the operating
system to interact with the server. This symptom may be misinterpreted as a system hang.
2