Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Computadoras - HP ProLiant BL420c Server Blade (728.29 kb)
Computadoras - HP ProLiant BL420c Server Blade (686.99 kb)
Resumen del manual
Updating instructions are documented in the HP Intelligent Provisioning User Guide.
Known issues and suggested actions
HP strongly recommends that the resolutions listed in this document be applied accordingly to instructions
in the resolution documents. Failure to do so might result in issues that can cause disruption to the
operation and functionality of HP ProLiant servers. This list is updated as new issues are discovered
and resolved.
Operational issues
•
Issue: Entering your e-mail address as your HP Passport User ID might not work during Direct
Connect registration even though your e-mail address was the HP Passport User ID you used
during the HP Passport registration process.
Suggested action: If you changed your HP Support Center (HPSC) User ID, your e-mail address
will no longer work. Enter your User ID and not your e-mail address.
•
Issue: Fibre Channel configured manual installations using the HP SN1000E 16Gb 1-port PCIe
Fibre Channel Host Bus Adapter are not loading the driver. The configured logical unit number
(LUN) is not being detected while installing the operating system. This has been observed for both
Windows 2012 Datacenter and Red Hat Enterprise Linux 5.9 operating systems.
Suggested action: Use the Recommended or Customized installation method.
•
Issue: In the License Management utility, when you provide the license keys for both the iLO
Advanced License Pack and the HP SmartCache License Pack, and then click Apply to save them,
it appears that only the last license key that was entered has been saved.
Suggested action: Both the keys are not saved and only the last entered key will be saved. So
only one key at a time should be entered and saved.
•
Issue: Intelligent Provisioning 1.60b does not support multi-boot image configurations with the HP
USB Key Utility in UEFI environments.
Suggested action: In UEFI environments use only single-image boot configurations with the HP
USB Key Utility.
•
Issue: Unable to use Network share/FTP source media for installing Intelligent Provisioning.
Suggested action: Use DVD/USB source media for installations in place of Network share/FTP
source media.
•
Issue: When editing the iLO Functionality field under the iLO Access Settings of the iLO Configuration
Utility, the changes are not saved.
Suggested action: Use iLO 4 to change this setting.
•
Issue: The OS-recommended DVD is acting as a manual installation when the server is set up to
be password protected.
Suggested action: The Intelligent Provisioning installation process is working as designed. Because
the system is password protected, no changes can be applied that will bypass this issue.
User interface issues
•
Issue: The SNMP port link on the iLO configuration Management page is non-operational.
Suggested action: Change the SNMP port by clicking the Access Settings link on the iLO
Configuration Utility page, selecting the Service tab, and making the change on the Service screen.
•
Issue: English language content is sometimes included in the non-English-localized (such as Italian
or Spanish) OS Review page.
Suggested action: None.
6
Known issues and suggested actions
...Otros modelos de este manual:
Computadoras - HP ProLiant BL660c Server Blade (143.99 kb)
Computadoras - HP ProLiant MicroServer Gen8 Server (143.99 kb)
Computadoras - HP ProLiant WS460c Gen8 Workstation (143.99 kb)
Computadoras - HP ProLiant BL480c Server Blade (143.99 kb)