Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
description (Ger/US) 1" * 3.5", anthracite bezel max. 1x per system S26361-F3148-E1 DVD-RW 16x super multi drive all formats, DUAL/DL, DVD-RAM incl. description (Ger/US) only W2K, W3K and Linux 1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel max. 2x per system max. 1x per system S26361-F3157-E3 Tape drive LTO2HH Ultrium 200GB, 24MB/s, U160 SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", anthracite bezel max. 1x per system S26361-F2849-E3 Tape drive VXA-2 80GB, 6MB/s, U2W SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning catridge 1.6 x 5.25", anthracite bezel max. 2x per system S26361-F2848-E3 Tape drive DDS Gen5 S26361-F2848-E31 (only for OBDR) DDS-G5 for One buttom dis. recov. 36GB, 3MB/s, U2W SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning catridge 1.6 x 5.25", anthracite bezel max. 2x per system SNP:SY-F2234E1-A DVD-ROM ATAPI 2x 2x E Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 10 of 18 System configurator and order-information guide E PRIMERGY TX150 S4 Status 25.11.2005 S26361-F2814-E6 Backup drive and hard disk should run on separate channels 68-Pin Kit for accessible drives Cable with Terminator To connect acc. drives to If internal HDD's are connected at the RAID controller separate SCSI controller (not IME/ZCR), then for internal accessible drives max. 1x per system the cable S26361-F2814-E6 must be ordered additionally! Section VI Hard Disk Drives S26361-F3121-E173 S26361-F3121-E114 S26361-F3121-E130 Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier Hard disk 300GB in 1" carrier 10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache 10000rpm,<5,5ms, 8MB Cache Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray occupies 1" bay occupies 1" bay occupies 1" bay SCSI/RAID controller necessary SCSI/RAID controller necessary SCSI/RAID controller necessary 4x max. 4x per system max. 4x per system max. 4x per system S26361-F3121-E573 S26361-F3121-E514 Hard disk 73GB in 1" carrier Hard disk 146GB in 1" carrier 15.000rpm,<4ms, 8MB Cache 15.000rpm,<4ms, 8MB Cache Ultra 320 SCSI (320MB/s) Ultra 320 SCSI (320MB/s) Interface: Wide SCA (80-pins) Interface: Wide SCA (80-pins) hot plug/hot replace tray hot plug/hot replace tray occupies 1" bay occupies 1" bay SCSI/ RAID controller necessary SCSI/ RAID controller necessary max. 4x per system max. 4x per system F Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 11 of 18 System configurator and order-information guide F PRIMERGY TX150 S4 Status 25.11.2005 Section VII SCSI-Controller All internal cables and adapters are included within the basic units and components respectively Cabeling priorities: internal HDs are cabled according to following priorities. (Prio 1 - 3 ): 1.) For a configuration without any Disk Array Controller and without zero channel RAID the onboard U320 Controller is connected to the internal HDs. 2.) For a configuration with a 2-channel Disk Array controller (without zero-channel RAID) One channel will be connected with the internal hard disks. The second channel is externally available. internal backup devices are cabled according to following priorities. (Prio 1 - 2 ): 1) For a configuration without additional SCSI controller the onboard U320 controller is connected to internal backup devices 2) For a configuration with Adaptec SCSI Card 29160 S26361-F2399-E2 (without SCSI 160 controller S26361-F2644-E11) this controller is connected to internal backup devices A. on-board SCSI-controller for accessible drives and SCSI-HDs 1-channel Ultra 320 SCSI on-board controller; included as standard. Example for IME with 3 data devices: All internal cables and adapters for the basic unit and for components are included. 1x per TX150S4 T26139-Y3849-L1 Only SX10 Backup is released for the external External on-board SCSI Interface connection of the on-board SCSI controller Cable and external and the 29160. connector interface (HD68) Cable sold separately not mounted in factory. occupies one connection panel Use this cable only if on-board controller is not max. 1x per system for ext. used otherwise (eg. S26361-F2814-E6) G LSI Integrated Mirroring Enhanced (IME) is a RAID 1 implementation (no RAID 0 support). It can be operated also with an odd number of hard disks (max. one RAID 1 Set). There are, depending on system, up to 6 hard disks, including a hot spare disk, possible. Supportet are only the operating systems Windows2000/2003 as well as SuSE and RedHat Linux. Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 12 of 18 System configurator and order-information guide G PRIMERGY TX150 S4 Status 25.11.2005 B. SCSI controller for internal backup drives S26361-F2399-E2 SCSI 160 Controller Ada...
Otros modelos de este manual:Computadoras - PRIMERGY TX150 S4 (179.91 kb)