Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• Non-operating: -40° to +70°C • Humidity, non-operating : 90%, non-condensing @ 35°C • Vibration, operating: Half sine, 2g peak, 11 m/sec • System cooling: 2081.5 BTU/hour Hardware options Note: To purchase the any of the following hardware options, contact your local Acer representative. • Media storage • LSI 1068 SAS controller board provides both SAS and SATA2 support • LSI MegaRAID SAS RAID controller board supports: – Hardware RAID 0, 1, 5, 10, and 50 levels – Backup battery unit (BBU) option • Ultra 320 SCSI HBA (for backup devices only) • Redundant modules • Hot-swap redundant power supply • Redundant system fan • Server management • BMC (Baseboard Management Controller) module – IPMI (Intelligent Platform Management Interface) 2.0 compliant – In-band and out-band server management • ARMC/3 (Acer Remote Management Card/3) module – High performance KVM redirection – Includes a dedicated NIC port – USB mouse, keyboard, and media redirection 8 1 System tour External and internal structure Front bezel No. Component 1 Side panel release button 2 Security keylock This lock secures the bezel door to protect the server unit from unauthorized access. 3 LED indicator panel For more information on the LED indicators description, go to page 21. 4 Bezel door 9 Front panel No. Icon Component Description 1 DVD-ROM drive Eject button Press this button to open the DVD drive tray. 2 DVD-ROM drive activity indicator When the LED indicator is lit, there is an ongoing DVD drive activity. 3 DVD-ROM drive mechanical eject hole When the DVD drive tray get stucked, insert a paperclip to this hole to manually eject the tray. 4 DVD-ROM drive Disk drive for reading CD, VCD, and DVD contents. 5 5.25-inch drive bay Allows installation of additional storage devices. Go to page 4 for a list of supported devices. 6 Power indicator Indicates the system power status (green). 7 HDD activity indicator Indicates the status of a system hard drive (green/amber). 8 Status/fault indicator Indicates the status of the system operations (green/amber). 1 System tour No. Icon Component Description LAN port 1/2 status Indicate the system network indicators connection status. 10 Hot-plug HDD activity indicator Indicates the status of a hot-plug HDD installed in the system (green /amber). 11 HDD cage Supports four hot-plug or easy-swap SAS or SATA2 HDDs. 12 HDD cage bay Supports an optional four-bay HDD cage (hot-plug or easy-swap). 13 USB 2.0 ports Connects to USB devices. 14 Power button Press to turn the server on/off, or to put it in standby mode. 15 FDD Eject button Press this button to eject the floppy disk from the FDD. 16 Floppy disk drive Disk drive for reading floppy disks. 17 FDD activity indicator When the LED indicator is lit, there is an ongoing FDD activity. 11 Rear panel No. Icon Component Description 1 Power supply module release latch Push down the latch to disengage the module from the chassis. 2 Power supply module cord socket Connect the system power cord here. 3 Main power supply module Provides the system’s main power supply. 4 PS/2 mouse port Connects to a PS/2 mouse. 5 PS/2 keyboard port Connects to a PS/2 keyboard. 6 Parallel port Connects to parallel devices. 7 Serial port Connects to serial devices. 8 Monitor port Connects to monitors. 1 System tour No. Icon Component Description 9 Unit Press to mark a particular server unit identification within a server group (when (UID) switch/ rack-mounted) for purpose of indicator identification during servicing or maintenance procedures. (blue) USB 2.0 ports Connects to USB devices. Gigabit LAN Connects to an Internet or intranet ports 1/2 network. 12 PCI slot covers Protects the vacant expansion slots. 13 System fan Regulates the system airflow. 14 Redundant power supply module bay Accommodates an optional hot-swap redundant power supply module. 15 Power supply module fault indicator Indicates the occurrence of a fault condition in the power supply module. (green/amber) 16 Power supply module status indicator Indicates the status of the power supply module. (green) Internal components No. Component 1 Redundant power supply module bay 2 Air duct 3 Heat sink fan (HSF) assemblies 4 Release sliders for the 5.25-inch devices 5 Release sliders for the HDD cages 6 Mainboard 7 PCI slot lock levers 8 System fan Users have the option to purchase a redundant system fan unit. 1 System tour System boards Mainboard No. Code Description 1 CN2 Top: PS/2 mouse port Bottom: PS/2 keyboard port 2 COM1 Serial port 3 LPT1 Parallel/printer port 4 VGA1 Monitor port 5 SW1 UID switch 6 — Gigabit LAN ports 7 — USB 2.0 ports 8 DIMMA1 Branch 0 FBD slots DIMMA2 DIMMB1 DIMMB2 9 DIMMC1 Branch 1 FBD slots DIMMC2 DIMMD1 DIMMD2 10 FAN_R2 System fan 2 cable connector 11 FAN_R1 System fan 1 cable connector 12 ATX1 24-pin ATX power connector 13 ATX3 8-pin ATX power connector 14 FAN_CPU1 Processor 1 HSF cable connector 15 U47 Intel 5000P MCH (north bridge) 16 CPU 1 Processor 1 socket 17 U108 Winbond W83792D hardware mo...
Otros modelos de este manual:Computadoras - Altos G540 (13.8 mb)