Manual de usuario Acer, modelo 2200 Series
Fabricar: Acer
Tamaño del archivo: 4.07 mb
Nombre del archivo: c456f833-45a3-4273-8a87-20e9bc64e93f.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere
Resumen del manual
English EnglishEnglish 62 Software Acer Disc to Disc Recovery Note: This feature is only available on certain models. Multilingual operating system installation Follow the instructions to choose the operating system and language you use when you first power-on the system. 1 Turn on the system. 2 Acer multilingual operating system selection menu will pop-up automatically. 3 Use the arrow keys to scroll to the language version you want. Press Enter to confirm your selection. 4 The operating system and language you choose now will be the only option for future recovery operations. 5 The system will install the operating system and language you choose. Restore without a Recovery CD This recovery process helps you restore the C: drive with the original software content that is installed when you purchase your notebook. Follow the steps below to rebuild your C: drive. (Your C: drive will be reformatted and all data will be erased.) It is important to back up all data files before you use this option. Before performing a restore operation, please check the BIOS settings. a Check to see if "Acer disc-to-disc" function is enabled or not. b Make sure the [Acer D2D Recovery] setting in [Main] is [Enabled]. c Exit the BIOS Setup Utility and save changes. The system will reboot. Note: To activate BIOS Setup Utility, press during POST. 63 1 Restart the system. 2 The instruction "Press to Enter BIOS" is shown at the bottom of the screen, during POST. 3 Press + at the same time to enter the recovery process. 4 The message "The system has password protection. Please enter 000000:" is displayed. 5 Enter six 0s and continue. 6 "Acer Self-Configuration Preload" window appears. 7 Use the arrow keys to scroll through the items (operating system versions) and press "Enter" to select. Setup password and exit Press "F3" to setup password or press "F5" to exit the system recovery process when "Acer Self-Configuration Preload" window appears. If "F3" is pressed, the next screen shows "Please enter new password:" enter one to eight alphanumeric characters. You will be asked to reenter your password for confirmation before continuing. The screen will display "Password has been created. Press any key to reboot...", hit any key to reboot your system. If "F5" is pressed, the recovery process will be terminated and the system will reboot and start normally. Important: This feature occupies 2 GB in a hidden partition on your hard drive. English 64 Software English Troubleshooting This chapter instructs you on how to deal with common system problems. Please read it before calling a technician. Solutions to more serious problems may require opening the computer. Do not attempt to open and service the computer by yourself. Contact your dealer or an authorized service center for assistance. 67 Frequently asked questions This section suggests solutions to commonly encountered problems. I press the power button, but my computer does not start or boot-up. Look at the Power status indicator: • If it is not lit, no power is being delivered to the computer. Check the following: • If you are running on battery power, the battery may be low and unable to power the computer. Connect the AC adapter to recharge the battery pack. • If you are running on mains power, make sure that the AC adapter is properly plugged in to the computer and to the power outlet. Nothing appears on the screen. The computer's power management system automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not turn the display back on, check the following: • The brightness level might be too low. Press Fn + > hot key to increase the screen brightness level. • The display device might be set to an external monitor. Press the Fn + F5 hot key to toggle the display setting. • The system may be in standby mode. Try pressing the power button to resume. The image is not full-screen. Make sure that the resolution is set to a resolution your system supports: • Right click on your Windows desktop and select Properties to bring up the Display Properties dialog box. Alternatively, click on the Display icon in Control Panel. • Click on the Settings tab to check the resolution setting. Resolutions lower than the specified resolution result in a display that is less than full-screen. English EnglishEnglish 68 Troubleshooting There is no audio coming from my computer. Check the following: • The volume may be muted. In Windows, look at the volume control icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option. • The volume level may be too low. In Windows, click on the volume control icon on the taskbar, and then use the slider control to increase the volume level. • If headphones are connected to the headphone jack on the computer, your computer's built-in speakers will be turned off. My external microphone does not work. Check the following: • Make sure that the external microphone is...
Otros modelos de este manual:
Computadoras - 2700 Series (4.07 mb)
)
