Firmware release notes for Windows NT AlphaServer 4100/4000 customers are available separately. Information about where to obtain AlphaBIOS console release notes is provided in Section 1.7 of this document. IMPORTANT NOTE: Beginning with SRM V5.3 console firmware, the AlphaBIOS console was relocated to a different sector in the flash rom to accomodate Windows NT serviceability. Please read the update procedures information, found in Chapter 2, carefully for the details on this change and what ne

Battery gauge will not be accurate until battery is fully charged and discharged once. Refer to your User’s Guide: “Calibrating the Battery” for further information. Connect AC adapter and power cord Press power button AC Power Cord Connection varies by country Battery AC Adapter Unit Insert battery and press door upward until it clicks 2 1 3 CD/DVD* DRIVE OPERATION *DVD available on select models Connect modem for internet, e-mail, and fax 1200 SERIES QUICK SETUP 1 2 4 5 3 Open unit by side lat

Redundant hot-plug power supply (optional) 2. System Insight Display 2. PCI Express and PCI-X expansion slots 3. Hot Plug Redundant Fans (standard) 3. Hot-plug power supply (primary) 4. 1.44 MB Diskette Drive (optional) 4. T-15 Torx screwdriver 5. DVD/CD-RW drive (standard) 5. NIC connector 2 6. Front Panel LED Display (internal and external health, Unit 6. NIC connector 1 ID light) and Power Button 7. Integrated Lights-Out 2 (iLO 2) connector 7. Two USB ports 8. Serial connector 8. One video po

Customer assures that it will comply with those regulations whenever it exports or re-exports controlled products or technical data obtained from COMPAQ or any product produced directly from the controlled technical data. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. The information in this publication is subject to change without notice and is provided "AS IS" WITHOUT WARRANTY OF

60001024 Third Edition . Copyright 2002 Intervoice, Inc. All rights reserved. Trademarks of Intervoice, Inc. and/or its affiliates: Names and marks for products provided by the Company’s suppliers are used herein for identification purposes and may be trademarks of their respective companies. Windows NT and Windows 2000 are registered trademarks of Microsoft. The Apache Software License, Version 1.1 Copyright . 2000–2001 The Apache Software Foundation. All rights reserved. Java Runtime Environme

Power-On Password Enter, change, or delete a power-on password. System Configuration menu Select To do this Language Support Change the Setup Utility language. 72 Chapter 5 Computer Setup Select To do this Processor C4 State Enable/disable the processor C4 sleep state. Boot Options Set the following boot options: . f10 and f12 Delay (sec.).Set the delay for the f10 and f12 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). . Internal Network Adapter boot.Enable/dis

Repeat with any other QBBs to add. 5. Specify the operating system for the partition in the OS type dropdown list, and, optionally, supply a name for the partition in the name block. Click OK. The Create/Modify a Partition Map screen returns. 6. Repeat steps 3 through 5 to add other partitions. As QBBs are added, the message below the Total block indicates if the hardware requirements of a partition have been met. Each partition must have 9-14 SMC Installation and User's Guide at least one CPU,

D01 This manual provides installation and configuration instructions for the system management console, as well as information about using the system management console for managing consoles in Compaq AlphaServer GS80/160/320 systems. This manual is for service providers, managers, and operators of Compaq AlphaServer GS80/160/320 systems. Compaq Computer Corporation Revised, February 2001 © 2001 Compaq Computer Corporation. Compaq, the Compaq logo, Compaq Insight Manager, AlphaServer, StorageWor

5. When Outlook Express sends or receives mail, by default it removes the messages from the server. To leave a copy of messages on the server, do the following: a. From the Tools menu select Accounts. In the Internet Accounts window right-click on the account name and select Properties from the pop-up menu. The account_name Properties dialog box displays (Figure 5–11). b. Select the Advanced tab. In the section labeled Delivery select the checkbox labeled Leave a copy of messages on server. Figu

Four removable media bays contain one third-height diskette drive and one half-height IDE CD-ROM drive. Two bays can contain a second CD-ROM drive, tape drives, hard drives, or any SCSI device. Compaq ProLiant ML370 Servers support up to ten mass storage devices including the diskette drive and IDE CD-ROM drive. Figure 2-7 and Table 2-1 describe the drive configurations. 3 5 4 3 2 1 0 2 1 6 5 4 9 8 7 Figure 2-7. Drives and related components Table 2-1 Drives and Related Components Item Descripti