Votos - 1, Puntuación media: 5 ( )

Fabricar: Kenmore Tamaño del archivo: 1.64 mb Nombre del archivo: Idioma del manual:

• If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET . FAN SPEEDMODE QUIET TEMP OFF/ON AIR SWINGPOWERFUL TIMER SET CANCEL ON OFF 1 2 3 SET CHECK CLOCK RESE AC RC 6 E18JKK-1, E22JKK-1 7 TO ENJOY QUIET OPERATION • This operation reduces airflow noise. 8 TO REACH TEMPERATURE QUICKLY • Single Split System: This operation stops automaticallyafter 20 minutes. • Multi Split System: Press the button again or turn OFF theunit to stop this operation. 9 Press and hold for 5 seconds to dim or restore the unit’s indicator brightness. 10 Press and hold for approximately 10 seconds toshow temperature setting in °C or °F 11 Press and hold for approximately 5 seconds to show12-hour (am/pm) or 24-hour time indication. 12 Press to restore the remote control’s default setting. 13 Not used in normal operations. NOTESNOTES QUIET , POWERFUL • Can be activated in all modes and can be cancelled bypressing the respective button again. Q UIET , P O WERFUL • Cannot be selected at the same time. TO SET THE TIMERTO SET THE TIMER • To turn ON or OFF the unit at a preset time. ON OFF 1 2 S ET Select ON or OFF timer Set the time Confirm • To cancel ON or OFF timer, press O N or OFF then press CANCEL . • When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover. • If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET . FAN SPEEDMODE QUIET TEMP OFF/ON AIR SWINGPOWERFUL TIMER SET CANCEL ON OFF 1 2 3 SET CHECK CLOCK RESE AC RC 6 8 TROUBLESHOOTING The following symptoms do not indicate malfunction.The following symptoms do not indicate malfunction. SYMPTOMSYMPTOM CAUSECAUSE Mist emerges from indoor unit. >• Condensation effect due to cooling process. Water flowing sound during operation. >• Refrigerant flow inside the unit. The room has a peculiar odour. >• This may be due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic fan speedsetting. >• This helps to remove the surrounding odours. Airflow continues even after operation has stopped. >• Extraction of remaining heat from the indoor unit(maximum 30 seconds). Operation is delayed a few minutes after restart. >• The delay is a protection to the unit’s compressor. Outdoor unit emits water/steam. >• Condensation or evaporation occurs on pipes. Timer indicator is always on. >• The timer setting repeats daily once set. Power indicator blinks during HEAT mode with no warm air supply (and louver is closed). >• The unit is in defrost mode (and AIR SWING is set to AUTO). Indoor fan stops occasionally during heating ope...

Descargar ahora

Introduzca dos números de la imagen: