Votos - 2, Puntuación media: 4 ( )

Fabricar: Philips Tamaño del archivo: 1.89 mb Nombre del archivo: Idioma del manual:

During cooling if the humidity in the room is very high (RH above 80 %), condensation may occur at the air discharge louver. It is advisable to operate the fan at high speed under this condition. DRYING When activated, the air conditioner will operate on and off intermittently. The fan will automatically operate at low speed. Fan speed, temperature settings and sleep mode will be by-passed. This function will not operate if the room temperature is lower than 59°F (15°C). FAN ONLY The following speed can be selected. Low mid high auto. At auto, the fan speed will be automatically selected by the micro-processor, depending on the difference between factory pre-set and room temperature. TIMER This feature allows the air conditioner to be automatically SWITCH ON or SWITCH OFF after a predetermined time. CLOCK This is for setting the real time to facilitate the operation of the timer. CARE AND MAINTENANCE . The air conditioner requires proper care and maintenance for efficient operation. A periodic inspection and cleaning may be available from your dealer or distributor. Be sure to ask about this service at the time of installation. The user can also perform some of the care and maintenance. Please follow these instructions. . Be sure to disconnect the power supply before undertaking any inspection. . Open the RETURN AIR GRILLE and remove the air filters. Clean by washing or with a vacuum cleaner. Dry the filters before putting them back on the unit. . Do not operate the air conditioner without the air filters in it. Remember that the filters protect the coil from getting dirty. A dirty coil is more difficult to clean than a dirty filter. Clean the filters at least twice a month and more if the environment is dusty. . CLEAN THE UNIT: Clean with a wet soft cloth. Do not wash the air conditioner. Never use the following to clean the air conditioner. • Hot water above 104°F (40°C). • Volatile substances like benzene, gasoline, thinner and other solvents. END OF SEASON: . When the air conditioner is to stop operating for prolonged periods, for example, at the end of the season, please follow these instructions before shut down. Operate the unit at the following setting for 2 to 3 hours. • Type of Operation: Cool • Temperature setting: 86°F (30°C). • This will dry up any residual water in the unit. • Remove the batteries from the Remote Controller. . Use car wax on the painted surface of the outdoor unit. START UP: Operation after prolonged period . Clean the unit and the filter as described above. . Operate the FAN ONLY for half a day to remove any moisture that may have accumulated inside the unit. TROUBLE SHOOTING The following are normal and should not be treated as defects. . Hissing sound, like flow of water from the unit. This is the sound of the refrigerant at the expansion device, which can be heard from time to time depending on the indoor and outdoor ambient conditions. . The unit does not cool for a few minutes after it restarts. This is because a time delay mechanism built into the unit prevents the compressor from starting for a few minutes. This is to protect the compressor from breakdown. . Smell from the supply air: The coil and filters absorb the smell from the environment and the supply air may also have the same smell. This usually happens in places where heavy cigarette smoke exists in the air. BEFORE CALLING FOR SERVICE, PLEASE CHECK THE FOLLOWING: Air conditioner does not operate: . Check the thermostat setting to ensure that it is not set above the room temperature. . Check the circuit breaker. . Check the power supply to ensure that it is not interrupted. Cooling is insufficient: . Check and clean the filters if necessary. . Check that the thermostat setting is not above room temperature for cooling. . Check that all windows and doors are closed. . Check if there are sources of heat present in the room, like stove burners. . Check that the fan speed is set to the HIGH setting . If the system still does not operate or does not provide sufficient cooling, call for a professional serviceman. AMW/AMC 25 AMW/AMC 30 AMW/AMC 45 & 60 SERVICE NOTES AITONS' EQUIPMENT INC. Guelph, Ontario e-mail: info@aitons.com Printed in Canada 03/03 ...

Descargar ahora

Introduzca dos números de la imagen: