Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Panasonic Tamaño del archivo: 3.02 mb Nombre del archivo: Idioma del manual:

Do not install the unit in a potentially explosive or fl ammable atmosphere. Failure to do so could result in fi re. Do not insert your fi ngers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. Do not expose yourself directly to cold air for a long period to avoid excess cooling. Do not sit or step on the unit, you may fall down accidentally. REMOTE CONTROL Do not allow infants and small children to play with the remote control to prevent them from accidentally swallowing the batteries. POWER SUPPLY Do not use modifi ed cord, joint cord, extension cord or unspecifi ed cord to prevent overheating and fi re. To prevent overheating, fi re or electric shock: • Do not share the same power outlet with other equipment. • Do not operate with wet hands. • Do not over bend the power supply cord. • Do not operate or stop the unit by inserting or pulling out the power plug. Air Inlet Air Outlet Air Outlet Air Inlet Remote Control Power Supply Indoor Unit Outdoor Unit ENGLISH WARNINGWARNING POWER SUPPLY If the supply cord is damage, it must be replacedby the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. It is strongly recommended to be installedwith Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) to preventelectric shock or fire. To prevent overheating, fire or electric shock: • Insert the power plug properly. • Dust on the power plug should be periodically wiped with a dry cloth. Stop using the product when any abnormality/ failure occurs and disconnect the power plug orturn off the power switch and breaker. (Risk of smoke/fi re/electric shock) Examples of abnormality/failure• The ELCB trips frequently. • Burning smell is observed. • Abnormal noise or vibration of the unit is observed. • Water leaks from the indoor unit. • Power cord or plug becomes abnormally hot. • Fan speed cannot be controlled. • The unit stops running immediately even if it is switched on for operation. • The fan does not stop even if the operation is stopped. Contact immediately your local dealer formaintenance/repair. This equipment must be earthed to preventelectrical shock or fire. Prevent electric shock by switching off the power supply and unplug when: - Before cleaning or servicing. - Extended non-use. - Abnormally strong lightning activity. CAUTIONCAUTION INDOOR UNIT AND OUTDOOR UNIT Do not wash the indoor unit with water, benzene, thinner or scouring powder to avoid damage orcorrosion at the unit. Do not use for preservation of preciseequipment, food, animals, plants, artworkor other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front ofthe airflow outlet to avoid fi re propagation. Do not expose plants or pet directly to airfl ow to avoid injury, etc. Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxingthe floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas toprevent damage to the unit. Do not dismantle the unit for cleaning purpose toavoid injury. Do not step onto unstable bench when cleaningthe unit to avoid injury. Do not place vase or water container on theunit. Water may enter the unit and degrade the insulation. This may cause an electric shock. Do not open window or door for long time duringCOOL/DRY mode operation. Ensure drainage pipe is connected properly andkeep drainage outlet clear of gutters, containersor does not immersed in water to prevent waterleakage. After long period of use or use with anycombustible equipment, aerate the roomregularly. After long period of use, make sure theinstallation rack does not deteriorate to preventthe unit from falling down. REMOTE CONTROL Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. To prevent malfunction or damage of the remote control: • Remo...

Descargar ahora

Introduzca dos números de la imagen: